Rogers RO4350B 2-Layer 1.524mm Immersion Silver PCB for RF Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.
RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing method as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B laminates do not require the special through-hole treatments or handling procedures as PTFE based materials. These materials are UL 94 V-0 rated for active devices and high power RF designs.
Stable Dielectric Constant: 3.48 ±0.05 at 10GHz/23°C Low Loss Performance: Dissipation Factor of 0.0037 at 10GHz/23°C Temperature Stability: Thermal Coefficient of DK +50 ppm/°C ranging -50°C to 150°C Thermal Management: Thermal Conductivity of 0.69 W/m/°K Dimensional Stability: X axis CTE 10 ppm/°C, Y CTE 12 ppm/°C, Z CTE 32 ppm/°C High Temperature Resistance: High Tg value of >280°C Environmental Durability: Low water absorption of 0.06% Safety Certified: UL 94-V0 Flammability
Copper Layer 1 - 35 μm Rogers RO4350B Core - 1.524 mm (60mil) Copper Layer 2 - 35 μm
Components: 27 Total Pads: 108 Thru Hole Pads: 72 Top SMT Pads: 36 Bottom SMT Pads: 0 Vias: 101 Nets: 2
Cellular Base Station Antennas and Power Amplifiers RF Identification Tags Automotive Radar and Sensors LNB's for Direct Broadcast Satellites
Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
