BICHENGPCBBicheng Technologies Limited

High Frequency 6-Layer Hybrid PCB RO4350B and S1000-2M with ENIG Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4350B is a proprietary woven glass reinforced hydrocarbon/ceramic laminate offering: Electrical performance approaching PTFE/woven glass Standard epoxy/glass manufacturability Cost-effective alternative to traditional microwave laminates UL 94 V-0 rating for high-power RF designs

Tight dielectric constant (Dk) control Excellent dimensional stability (CTE matched to copper) Reliable plated through-holes in thermal shock conditions High Tg >280°C for stable processing

Complementary material providing: Improved through-hole reliability with lower Z-axis CTE Superior mechanical processability Lead-free compatibility Excellent anti-CAF performance UV blocking/AOI compatibility

Dielectric Constant of DK 3.48 +/-0.05 at 10GHz/23°C Dissipation Factor of 0.0037 at 10GHz/23°C Thermal Conductivity 0.69 W/m/°K X axis CTE of 10 ppm/°C, Y CTE of 12 ppm/°C, Z CTE of 32 ppm/°C High Tg value of >280 °C Low water absorption of 0.06%

Lower Z-Axis CTE for improved throughhole reliability Excellent Mechanical Processability and Thermal Resistance Leadfree Compatible Tg180℃ (DSC), UV Blocking/AOI compatible High heat resistance Excellent Anti-CAF performance Low water absorption

Components: 149Total Pads: 215Thru Hole Pads: 57Top SMT Pads: 38Bottom SMT Pads: 120Vias: 79Nets: 6

Artwork Format: Gerber RS-274-XQuality Standard: IPC-Class 2Via Types: Blind vias L1-L2Availability: Worldwide shipping

Commercial airline broadband antennasMicrostrip and stripline circuitsMillimeter wave applicationsRadar and guidance systemsPoint-to-point digital radio antennasHigh-frequency communication systems

The hybrid construction combines: RO4350B's superior high-frequency performance S1000-2M's mechanical reliability Balanced CTE for dimensional stability Cost-effective multilayer solution

PCB specifications

Base MaterialsRO4350B + S1000-2M
Layer Count6 layers
Dimensions76.5×83mm (±0.15mm)
Thickness1.5mm
Trace/Space4/4 mils
Hole Size0.3mm (min)
Via TypesBlind (L1-L2)
Copper Weight1oz (35µm) all layers
Via Plating20µm
Surface FinishENIG
Solder MaskBlue (both sides)
SilkscreenWhite (both sides)
Impedance Control50Ω (4mil top layer)
Electrical Test100% tested

Layer stack-up

  1. L1 · Copper (Top Layer) · 35 μm · - · Signal layer, ENIG finishcopper
  2. RO4350B · 0.254 mm · 3.48 @ 10GHz · Core materialcore
  3. L2 · Copper (Inner Layer 1) · 35 μm · - · Power/Ground planecopper
  4. Prepreg (1080 X2 RC63%) · 0.127 mm · 3.4 (typical) · Bonding layercore
  5. L3 · Copper (Inner Layer 2) · 35 μm · - · Signal layercopper
  6. S1000-2M · 0.254 mm · 3.2 (typical) · Core materialcore
  7. L4 · Copper (Inner Layer 3) · 35 μm · - · Power/Ground planecopper
  8. Prepreg (1080 X2 RC63%) · 0.127 mm · 3.4 (typical) · Bonding layercore
  9. L5 · Copper (Inner Layer 4) · 35 μm · - · Signal layercopper
  10. RO4350B · 0.254 mm · 3.48 @ 10GHz · Core materialcore
  11. L6 · Copper (Bottom Layer) · 35 μm · - · Signal layer, ENIG finishcopper

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com