BICHENGPCBBicheng Technologies Limited

4-Layer Hybrid PCB 0.98mm RO4350B+FR-4 ENIG for RF/Digital Integration

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.

RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing method as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B laminates do not require the special through-hole treatments or handling procedures as PTFE based materials. These materials are UL 94 V-0 rated for active devices and high power RF designs.

RO4350B material's thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4350B material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4350B laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4350B material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.

Stable Dielectric Constant: 3.48 ±0.05 at 10GHz/23°C Low Loss Performance: Dissipation Factor of 0.0037 at 10GHz/23°C Effective Thermal Management: Thermal Conductivity 0.69 W/m/°K Dimensional Stability: X axis CTE 10 ppm/°C, Y CTE 12 ppm/°C, Z CTE 32 ppm/°C High Temperature Resistance: High Tg value of >280°C Environmental Durability: Low water absorption of 0.06% Safety Certified: UL 94 V-0 rated

Multi-layer Design: Ideal for multi-layer board (MLB) constructions Cost Efficiency: Processes like FR-4 at lower fabrication cost Reliability: Excellent dimensional stability Economic Advantage: Competitively priced

Copper Layer 1 - 35 μm Rogers RO4350B Core - 0.508 mm (20mil) Copper Layer 2 - 18 μm FR-4 Prepreg - 0.2mm Copper Layer 3 - 18 μm Tg170 FR-4 Core - 0.102 mm (4mil) Copper Layer 4 - 35 μm

Components: 26 Total Pads: 59 Thru Hole Pads: 37 Top SMT Pads: 22 Bottom SMT Pads: 0 Vias: 125 Nets: 10

Cellular Base Station Antennas and Power Amplifiers RF Identification Tags Automotive Radar and Sensors LNB's for Direct Broadcast Satellites

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

4-Layer Hybrid PCB

PCB specifications

Base MaterialRO4350B + TG170 FR-4
Layer Count4-layer boards
Board Dimensions80.22mm × 90mm = 1PC, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Vias TypeNo Blind/Buried vias
Finished Board Thickness0.98mm
Finished Cu Weight0.5oz inner layer / 1oz outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenWhite
Top Solder MaskGreen
Bottom Solder MaskGreen
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com