BICHENGPCBBicheng Technologies Limited

面向高 Dk 微波应用的 RT/duroid 6006 2 层 10mil 沉金电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RT/duroid 6006 laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. They provide high dielectric constants (Dk) to enable circuit size reduction. These materials are low loss, ideal for operating at X-band or below. Additionally, their tight Dk and thickness control deliver repeatable circuit performance.

Advanced Material: Rogers RT/duroid 6006 ceramic PTFE composites High Dielectric Constant: 6.15 ±0.15 at 10 GHz/23°C Low Loss Performance: Dissipation factor of 0.0027 at 10 GHz/23°C High Temperature Resistance: Td > 500°C TGA Environmental Durability: Moisture Absorption 0.05% Thermal Stability: CTE X-axis 47 ppm/°C, Y-axis 34 ppm/°C, Z-axis 117 ppm/°C Copper Options: Clad with standard and reverse treated electrodeposited copper foil Safety Certified: 94-V0 Flammability Modern Compliance: Lead free compatible

Space Efficiency: High dielectric constant for circuit size reduction High Frequency Performance: Low loss, ideal for operating at X-band or below Consistent Quality: Tight Dk and thickness control for repeatable circuit performance Environmental Reliability: Low moisture absorption Structural Integrity: Reliable plated through-holes in multi-layer boards

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm RT/duroid 6006 - 0.254 mm (10mil) Copper Layer 2 - 35 μm

Components: 31 Total Pads: 79 Thru Hole Pads: 37 Top SMT Pads: 42 Bottom SMT Pads: 0 Vias: 50 Nets: 2

Patch Antennas Satellite Communications Systems Power Amplifiers Aircraft Collision Avoidance Systems Ground Radar Warning Systems

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RT/duroid 6006 High-Dk Microwave PCB

规格参数

Base MaterialRT/duroid 6006
Layer Count2-Layer
Board Dimensions43mm × 107.5mm = 1PC, ±0.15mm
Minimum Trace/Space4/4 mils
Minimum Hole Size0.2mm
Blind ViasNo
Finished Board Thickness0.35mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理Immersion Gold
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment
Design StandardIPC-Class-2
Artwork FormatGerber RS-274-X
AvailabilityWorldwide

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com