BICHENGPCBBicheng Technologies Limited

RT/Duroid 5880 电路板 2 层 15mil 高频 PTFE 层压板,适用于微带与带状线电路

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RT/Duroid 5880 laminates are high-frequency PTFE composites reinforced with glass microfibers, specifically designed for demanding stripline and microstrip circuit applications. The random orientation of the microfibers ensures exceptional uniformity in dielectric constant. RT/Duroid 5880 laminates maintain consistent dielectric properties across panels and over a wide frequency range. Their low dissipation factor enhances their applicability in Ku-band and higher frequencies.

These laminates can be easily cut, sheared, and machined to the desired shape. They exhibit resistance to all solvents and reagents, whether hot or cold, typically used in etching printed circuits or plating edges and holes.

Dielectric constant of 2.2 with a tight tolerance of 0.02 at 10 GHz/23°C Dissipation factor of 0.0009 at 10 GHz Temperature coefficient of dielectric constant (TCDk) of -125 ppm/°C Low moisture absorption of 0.02% Coefficient of thermal expansion (CTE) of 31 ppm/°C in the X-axis, 48 ppm/°C in the Y-axis, and 237 ppm/°C in the Z-axis Isotropic properties

Uniform electrical properties across a wide frequency range Easily cut, sheared, and machined to shape Resistant to solvents and reagents used in etching or plating Suitable for high-moisture environments A well-established material Lowest electrical loss among reinforced PTFE materials

4.PCB Stackup: 2-layer rigid PCB Copper layer1: 35 µm Rogers RO4350B Core: 0.381mm (15 mil) Copper layer2: 35 µm

Board dimensions: 65.9 mm x 26.32 mm = 1 PCS, +/- 0.15 mm Minimum trace/space: 5/6 mils Minimum hole size: 0.2 mm No blind vias Finished board thickness: 0.5 mm Finished copper weight: 1 oz (1.4 mils) for outer layers Via plating thickness: 20 µm Surface finish: ENEPIG Top silkscreen: White Bottom silkscreen: No Top solder mask: No Bottom solder mask: No 100% electrical testing conducted prior to shipment

6.PCB Statistics Components: 15 Total pads: 60 Through-hole pads: 32 Top SMT pads: 28 Bottom SMT pads: 0 Vias: 23 Nets: 2

7.Type of Artwork Supplied:Gerber RS-274-X

Commercial airline broadband antennas Microstrip and stripline circuits Millimeter wave applications Radar systems Guidance systems Point-to-point digital radio antennas

RT/duroid 5880 PCB

规格参数

Copper layer135 µm
Rogers RO4350B Core0.381mm (15 mil)
Copper layer235 µm
Board dimensions65.9 mm x 26.32 mm = 1 PCS, +/- 0.15 mm
Minimum trace/space5/6 mils
Minimum hole size0.2 mm
Finished board thickness0.5 mm
Finished copper weight1 oz (1.4 mils) for outer layers
Via plating thickness20 µm
表面处理ENEPIG
Top silkscreenWhite
Bottom silkscreenNo
Top solder maskNo
Bottom solder maskNo
Components15
Total pads60
Through-hole pads32
Top SMT pads28
Bottom SMT pads0
Vias23
Nets2

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com