面向高频微波应用的 RT/duroid 6202 2 层 0.2mm 沉金电路板
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
产品简介
Rogers RT/duroid 6202 high frequency circuit materials are low loss and low dielectric constant laminates with limited woven glass reinforcement. It offers electrical and mechanical properties essential in designing complex microwave structures that are mechanically reliable and electrically stable. Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of limited woven glass reinforcement. This often eliminates double etching to achieve tight positional tolerances.
Dielectric constant (Dk) of 2.94 ±0.04 to 3.06 ±0.04 depending on thickness, 10GHz/23°C The DK of 0.005″ laminates are 3.06 ± 0.04 0.010″ and 0.015″ laminates are 3.02 ± 0.04 ≥0.020″ laminates are 2.94 ± 0.04 Dissipation factor of 0.0015 at 10 GHz/23°C Low thermal coefficient of Dk at 5 ppm/°C, at 10 GHz ranging -50 to +150°C Coefficient of Thermal Expansion (-55 to 288 °C) X-axis of 15, Y of 15, Z of 30 ppm/°C Td 500 °C TGA Thermal Conductivity of 0.68 W/m/k Moisture Absorption of 0.04% UL 94-V0
Low loss for excellent high frequency performance In-plane expansion coefficient matched to copper Excellent electrical and mechanical properties Very low etch shrinkage
Copper layer 1 - 35 μm Rogers RT/duroid 6202 Substrate - 5mil (0.127mm) Copper layer 2 - 35 μm
Phased Array Antennas Ground Based and Airborne Radar Systems Global Positioning System Antennas Power Backplanes Commercial Airline Collision Avoidance Beam Forming Networks
IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support
