BICHENGPCBBicheng Technologies Limited

RT/duroid 5880 电路板 2 层 10mil 铜填孔

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RT/duroid 5880 high-frequency laminates are advanced PTFE composites reinforced with glass microfibers, specifically designed for precision stripline and microstrip circuit applications. The randomly oriented microfibers ensure exceptional uniformity of the dielectric constant across the material.

The dielectric constant of RT/duroid 5880 laminates remains consistent from panel to panel and stable over a wide frequency range. Their low dissipation factor enhances the applicability of RT/duroid 5880 laminates to Ku-band frequencies and beyond.

These laminates can be easily cut, sheared, and machined into various shapes. Additionally, they exhibit resistance to all solvents and reagents, whether hot or cold, that are typically used in etching printed circuits or plating edges and holes.

Dielectric Constant: 2.2 with a tight tolerance of 0.02 at 10 GHz/23°C Dissipation Factor: 0.0009 at 10 GHz Temperature Coefficient of Dielectric Constant (TCDk): -125 ppm/°C Low Moisture Absorption: 0.02% CTE: X-axis 31 ppm/°C, Y-axis 48 ppm/°C, Z-axis 237 ppm/°C Isotropic Properties: Yes

Uniform electrical properties across a wide frequency rangeEasily cut, sheared, and machined to desired shapesResistant to solvents and reagents used in etching or platingIdeal for high-moisture environmentsWell-established material with a proven track recordLowest electrical loss among reinforced PTFE materials

RT/duroid 5880 PCB 2-layer 10mil Copper filled via

规格参数

Dielectric Constant2.2 with a tight tolerance of 0.02 at 10 GHz/23°C
Dissipation Factor0.0009 at 10 GHz
Low Moisture Absorption0.02%
CTEX-axis 31 ppm/°C, Y-axis 48 ppm/°C, Z-axis 237 ppm/°C
Isotropic PropertiesYes
Copper Layer 135 µm
RT/duroid 58800.254 mm (10 mil)
Copper Layer 235 µm
Board Dimensions50 mm x 45 mm (1 PCS), ±0.15 mm
Minimum Trace/Space5/4 mils
Minimum Hole Size0.2 mm
Blind ViasNone
Finished Board Thickness0.4 mm
Finished Copper Weight1 oz (1.4 mils) for outer layers
Via Plating Thickness20 µm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskMatt Green
Bottom Solder MaskNo
Copper Filling ViasOn designated IC pads
Electrical Testing100% electrical test conducted prior to shipment
Components23
Total Pads40
Through Hole Pads21
Top SMT Pads19
Bottom SMT Pads0
Vias42
Nets2
Type of Artwork SuppliedGerber RS-274-X
Accepted StandardIPC-Class-2
AvailabilityWorldwide

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com