BICHENGPCBBicheng Technologies Limited

面向高 Dk 微波应用的 RT/duroid 6010.2LM 2 层 75mil 沉银电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

RT/duroid 6010.2LM laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6010.2LM laminates provide high dielectric constants (Dk) to enable circuit size reduction. These materials are low loss, ideal for operating at X-band or below. Additionally, their tight Dk and thickness control deliver repeatable circuit performance.

High Dielectric Constant: 10.2 ±0.25 at 10GHz Low Loss Performance: Dissipation factor of 0.0023 at 10GHz High Temperature Resistance: Decomposition Temperature (Td) of 500°C TGA Exceptional Environmental Resistance: Moisture Absorption of 0.01% Thermal Stability: Coefficient of Thermal Expansion x/y/z: 24 ppm/°C, 24 ppm/°C, 47 ppm/°C Effective Thermal Management: Thermal Conductivity of 0.86W/mk Safety Certified: Flammability Rating of V-0 UL94

Circuit Miniaturization: High dielectric constant for circuit size reduction High Frequency Performance: Low loss, ideal for operating at X-band or below Enhanced Reliability: Low Z-axis expansion, providing reliable plated through holes in multilayer boards Environmental Stability: Low moisture absorption, reducing effects of moisture on electrical loss Consistent Performance: Tight Dk and thickness control for repeatable circuit performance

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm Rogers RT/duroid 6010.2LM Core - 1.905 mm (75mil) Copper Layer 2 - 35 μm

Components: 15 Total Pads: 41 Thru Hole Pads: 25 Top SMT Pads: 16 Bottom SMT Pads: 0 Vias: 41 Nets: 2

Patch Antennas Satellite Communications Systems Power Amplifiers Aircraft Collision Avoidance Systems Ground Radar Warning Systems

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RT/duroid 6010.2LM High-Dk Microwave PCB

规格参数

Base MaterialRT/duroid 6010.2LM
Layer Count2 Layers
Board Dimensions45.4mm × 31.8mm = 1PC, ±0.15mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness2.0mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理Immersion Silver
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment
Design StandardIPC-Class-2
Artwork FormatGerber RS-274-X
AvailabilityWorldwide

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com