BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 6002 2 层 0.8mm 沉银电路板 — 相控阵与雷达

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers RT/duroid 6002 laminates are ceramic-filled PTFE microwave materials with low dielectric constant for use in complex microwave structures. They are also low loss materials that provide excellent high frequency performance. Offering excellent mechanical and electrical properties, these materials are reliable for use in multi-layer board constructions.

This 2-layer rigid PCB is constructed entirely with RT/duroid 6002 as the core material, providing exceptional signal integrity, thermal stability, and low-loss performance for demanding RF, microwave, and space-grade applications.

Dielectric constant (Dk) of 2.94 +/- 0.04

Low thermal coefficient of Dk at 12 ppm/°C

Low Z-axis coefficient of thermal expansion at 24 ppm/°C

Low loss for excellent high frequency performance

In-plane expansion coefficient matched to copper; ideal for applications sensitive to temperature change

Low out-gassing; ideal for space applications

Excellent mechanical and electrical properties; reliable multi-layer board constructions

4.Rogers RT/duroid 6002 Construction Details

Copper_layer_1 – 35 μm Rogers RT/duroid 6002 Substrate – 30 mil (0.762 mm) Copper_layer_2 – 35 μm

Components: 94 Total Pads: 241 Thru Hole Pads: 196 Top SMT Pads: 45 Bottom SMT Pads: 0 Vias: 126 Nets: 2

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

9.Rogers RT/duroid 6002 High-Frequency Laminate – Product Introduction

RT/duroid® 6002 microwave material was the first low loss and low dielectric constant laminate to offer superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.

The thermal coefficient of dielectric constant is extremely low from -55°C to +150°C (-67°F to 302°F) which provides the designers of filters, oscillators and delay lines the electrical stability needed in today's demanding applications.

A low Z axis coefficient of thermal expansion (CTE) ensures excellent reliability of plated through-holes. RT/duroid 6002 materials have been successfully temperature cycled (-55°C to 125°C [-67°F to 257°F]) for over 5000 cycles without a single via failure.

Excellent dimensional stability (0.2 to 0.5 mils/inch) is achieved by matching the X and Y coefficient of expansion to copper. This often eliminates double etching to achieve tight positional tolerances.

The low tensile modulus (X,Y) greatly reduces the stress applied to solder joints and allows the expansion of the laminate to be constrained by a minimum amount of low CTE metal (6 ppm/°C), further increasing surface mount reliability.

½ oz. to 2 oz./ft² electrodeposited copper, ½ oz. to 1 oz. reverse treated electrodeposited copper or ½ oz. to 2 oz./ft² rolled copper may be specified as cladding on dielectric thicknesses from 0.005" to 0.125" (0.13 to 3.18mm). RT/duroid 6002 laminate is also available clad with aluminum, brass, or copper plates and resistive foils.

Applications particularly suited to the unique properties of RT/duroid 6002 material include flat and non-planar structures such as antennas, complex multi-layer circuits with inter-layer connections, and microwave circuits for aerospace designs in hostile environments. RT/duroid 6002 laminates have Underwriters Laboratories recognition under classification 94V-0 (Vertical Flammability Test).

Successfully temperature cycled over 5000 cycles without via failure

Complex multi-layer circuits with inter-layer connections

Aerospace microwave circuits in hostile environments

13.Standard Thicknesses, Panel Sizes & Claddings

*Additional non-standard thicknesses available from 0.005" to 0.250" in increments of 0.005"*

Additional claddings such as heavy metal, resistive foil, and unclad are available

应用领域

  • Dielectric constant (Dk) of 2.94 +/- 0.04
  • Low thermal coefficient of Dk at 12 ppm/°C
  • Dissipation factor of 0.0012 at 10GHz
  • Td 500 °C TGA
  • Thermal Conductivity of 0.6 W/m/k
  • Low Z-axis coefficient of thermal expansion at 24 ppm/°C
  • Moisture Absorption of 0.02%
30mil RT Duroid 6002 PCB Immersion Silver
CCL 46 RTduroid 6002

规格参数

Base materialRT/duroid 6002
Layer count2 layers
Board dimensions156mm x 87.9mm = 1PCS
Minimum Trace/Space6/7 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.8mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理Immersion Silver
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com