BICHENGPCBBicheng Technologies Limited

TP440 59mil Immersion Gold High-DK RF PCB for Beidou, Missile-Borne, and Miniaturized Antennas

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

TP440 is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.

This 2-layer rigid PCB is constructed entirely with TP440 as the core material at 1.5mm (59mil) thickness, with immersion gold surface finish, black top silkscreen, and 1oz copper on both sides. Its DK of 4.4 offers excellent high-frequency performance, making it ideal for demanding applications such as Beidou navigation systems, missile-borne electronics, fuzes, GPS antennas, and miniaturized antennas.

TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.

The dielectric constant can be arbitrarily selected within the range of 3 to 25 according to circuit requirements, and it is stable. Common dielectric constants include 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11, 16, and 20. The dielectric loss is low, and the loss increases as the frequency increases, but the change is not significant within 10 GHz.

TP440 features a dielectric constant of 4.4±0.09 at 10GHz, ultra-low dissipation factor of 0.0010, and excellent thermal stability. The material operates reliably across a wide temperature range from -100°C to +150°C and is easy to machine, supporting standard PCB fabrication processes including drilling, turning, grinding, shearing, and etching — capabilities that ceramic substrates cannot achieve. The copper foil adhesion is more reliable than ceramic substrates with vacuum coating.

Technical features & benefits

  • Dielectric Constant (DK): 4.4 ± 0.09 at 10GHz
  • Dissipation Factor (Df): 0.0010 at 10GHz
  • DK Tolerance: ±2%
  • Thermal Coefficient of DK (TCDK): -50 ppm/°C
  • Coefficient of Thermal Expansion (CTE): X=60 ppm/°C, Y=60 ppm/°C, Z=70 ppm/°C
  • Long-term Operating Temperature: -100°C to +150°C
  • Thermal Conductivity: 0.44 W/(M·K)
  • Density: 1.89 g/cm³
  • Excellent low-temperature resistance
  • Radiation resistance and low outgassing
  • Water absorption: ≤0.01%
  • Easy machinability (drilling, turning, grinding, shearing, etching)
  • Superior adhesion between copper foil and dielectric (more reliable than ceramic substrates with vacuum coating)
  • Ideal material for Beidou, missile-borne, fuze, and miniaturized antennas
  • Stable DK (4.4±0.09) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0010) — Excellent high-frequency performance with minimal signal loss
  • No Glass Fiber Reinforcement — Uniform dielectric properties and consistent performance
  • Wide Operating Temperature (-100°C to +150°C) — Reliable performance in extreme environments
  • Excellent Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
  • Superior Adhesion — Copper foil adhesion more reliable than ceramic substrates with vacuum coating
  • Easy Machinability — Supports drilling, turning, grinding, shearing, etching, and other methods which ceramic substrates cannot achieve
  • Cost-Effective — Lower processing cost compared to ceramic substrates
  • Immersion Gold Finish — Excellent solderability and corrosion resistance
  • Feature — Benefit
  • DK 4.4 ± 0.09 @ 10GHz — Stable dielectric constant for consistent impedance control
  • Df 0.0010 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
  • TCDK: -50 ppm/°C — Stable electrical performance over temperature
  • CTE: 60/60/70 ppm/K — Good dimensional stability
  • Thermal conductivity 0.44 W/m/K — Efficient heat removal
  • Thermoplastic resin — Easy machinability, cost-effective processing
  • Radiation resistance & low outgassing — Ideal for aerospace, missile-borne, and defense applications
  • Superior adhesion vs ceramic substrates — More reliable copper foil adhesion, no vacuum coating required

Product images

TP440 PCB
TP440 Material

PCB specifications

ItemSpecification
Base materialWangling TP440 (Polyphenylene oxide + Ceramic)
Layer count2-layer rigid PCB
Board dimensions45.63mm x 97.01mm = 1 PCS, ±0.15mm
Minimum Trace/Space5/8 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness1.6mm
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Note: The following thicknesses can be produced as either total thickness including copper or dielectric thickness. Please specify when ordering.

ParameterOptions
Standard Thicknesses (mm)0.5, 0.8, 1.0, 1.2, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 10.0, 12.0
Thickness Tolerances (mm)0.5mm: ±0.04, 0.8mm: ±0.05, 1.0mm: ±0.05, 1.2mm: ±0.05, 1.5mm: ±0.06, 2.0mm: ±0.075, 3.0mm: ±0.1, 4.0mm: ±0.1, 5.0mm: ±0.12, 6.0mm: ±0.12, 7.0mm: ±0.15, 8.0mm: ±0.18, 10.0mm: ±0.2, 12.0mm: ±0.3
Standard Panel Sizes150×150mm, 160×160mm, 200×200mm, 170×240mm (tolerance: -2mm)
Standard CladdingsED Copper: 0.018mm (½ oz), 0.035mm (1 oz); additional claddings available
DK Options (TP Series)3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11.0, 16.0, 20.0, 22.0, 25.0 (customizable 3.0-25)

Layer stack-up

Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)

Layer: Dielectric, Material: TP440 Core, Thickness: 1.5 mm (59mil)

Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB Statistics

Components: 24

Total Pads: 19

Thru Hole Pads: 11

Top SMT Pads: 8

Bottom SMT Pads: 0

Vias: 28

Nets: 1

Application areas

  • GPS antennas
  • Missile-borne systems and guidance electronics
  • Fuzes and proximity sensors
  • Miniaturized antennas (phased array, patch antennas)
  • Beidou navigation systems
  • High-frequency RF and microwave circuits
  • Satellite communication equipment

Properties

TP440 Typical Properties

PropertyTP440Dir.UnitsConditionTest Method
CompositionPPE / Ceramic (Molded)———Wangling official
Dielectric Constant (Process)4.40 ± 0.09Z—5 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)—Z——Wangling design value
Dissipation Factor0.0010Z—5 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-46—ppm/°C—Wangling official
CTE (Z)70Zppm/°C—Wangling official
Copper Peel Strength——lbs/in——
FlammabilityV-0———UL 94

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Important Process Considerations

This material is not suitable for 260°C thermal shock testing

Cannot be wave soldered

Hand soldering with a constant temperature soldering iron is recommended

Reflow soldering is generally not advised; if necessary, maximum temperature should not exceed 200°C

Multilayer processing requires careful consideration with low-temperature bonding sheets

When temperature exceeds 180°C, the material may deform, copper foil may peel off, and there may be significant changes in electrical performance

PCB processing is convenient — follow standard thermoplastic material processing guidelines for high yield

Processing cost is significantly lower than ceramic substrates

Data Source Notes

Dielectric Constant (Typical) is tested in the Z-direction of the material using GB/T 12636-1990 or IPC-TM-650 2.5.5.5 Stripline method.

Other properties are tested using or referencing IPC-TM-650 or GBT4722-2017 standard test methods.

All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Wangling materials for each application.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com