BICHENGPCBBicheng Technologies Limited

TP440 0.5mm High-DK RF PCB DK4.4 for Beidou, Missile-Borne, and Miniaturized Antennas

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

TP440 is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.

This 2-layer rigid PCB is constructed entirely with TP440 as the core material at 0.5mm thickness, with immersion gold surface finish and 1oz copper on both sides. Its DK of 4.4 offers excellent high-frequency performance, making it ideal for demanding applications such as Beidou navigation systems, missile-borne electronics, fuzes, GPS antennas, and miniaturized antennas.

TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.

TP440 features a dielectric constant of 4.4±0.09 at 10GHz, ultra-low dissipation factor of 0.0010, and excellent thermal stability. The material operates reliably across a wide temperature range from -100°C to +150°C and is easy to machine, supporting standard PCB fabrication processes including drilling, cutting, and engraving. The copper foil adhesion is more reliable than ceramic substrates with vacuum coating.

Technical features & benefits

  • Dielectric Constant (DK): 4.4 ± 0.09 at 10GHz
  • Dissipation Factor (Df): 0.0010 at 10GHz
  • Thermal Coefficient of DK (TCDK): -50 ppm/°C
  • Coefficient of Thermal Expansion (CTE): X=60 ppm/°C, Y=60 ppm/°C, Z=70 ppm/°C
  • Operating Temperature Range: -100°C to +150°C
  • Thermal Conductivity: 0.44 W/(M·K)
  • Density: 1.89 g/cm³
  • Long-term use temperature: -100°C to +150°C
  • Excellent low-temperature resistance
  • Radiation resistance and low outgassing
  • Water absorption: ≤0.01%
  • Easy machinability (drilling, cutting, engraving)
  • Superior adhesion between copper foil and dielectric
  • Stable DK (4.4±0.09) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0010) — Excellent high-frequency performance with minimal signal loss
  • No Glass Fiber Reinforcement — Uniform dielectric properties and consistent performance
  • Wide Operating Temperature (-100°C to +150°C) — Reliable performance in extreme environments
  • Excellent Radiation Resistance — Ideal for aerospace and defense applications
  • Superior Adhesion — Copper foil adhesion more reliable than ceramic substrates
  • Easy Machinability — Supports drilling, cutting, shearing, and engraving with high yield
  • Cost-Effective — Lower processing cost compared to ceramic substrates
  • Immersion Gold Finish — Excellent solderability and corrosion resistance
  • Feature — Benefit
  • DK 4.4 ± 0.09 @ 10GHz — Stable dielectric constant for consistent impedance control
  • Df 0.0010 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
  • TCDK: -50 ppm/°C — Stable electrical performance over temperature
  • CTE: 60/60/70 ppm/K — Good dimensional stability
  • Thermal conductivity 0.44 W/m/K — Efficient heat removal
  • Thermoplastic resin — Easy machinability, cost-effective processing
  • Radiation resistance — Ideal for aerospace, missile-borne, and defense applications

Product images

TP440 PCB
TP440 Material

PCB specifications

ItemSpecification
Base materialWangling TP440 (Polyphenylene oxide + Ceramic)
Layer count2-layer
Board dimensions67.5mm x 58.6mm = 1 PCS, ±0.15mm
Minimum Trace/Space6/8 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.6mm (0.5mm core + copper)
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
ParameterOptions
Standard Thicknesses0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 10.0mm, 12.0mm (± tolerance per thickness)
Standard Panel Sizes150x150mm, 160x160mm, 200x200mm, 170x240mm (tolerance -2mm)
Standard CladdingsED Copper: 0.018mm (½ oz), 0.035mm (1 oz); additional claddings available
DK Options3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11.0, 16.0, 20.0, 22.0, 25.0 (customizable 3.0-25)

Layer stack-up

  • Layer:Copper_layer_1 (Top);Material:Copper;Thickness:35 μm (1 oz)
  • Layer:Dielectric;Material:TP440 Core;Thickness:0.5 mm
  • Layer:Copper_layer_2 (Bottom);Material:Copper;Thickness:35 μm (1 oz)

PCB Statistics

  • Parameter — Value
  • Components — 11
  • Total Pads — 19
  • Thru Hole Pads — 10
  • Top SMT Pads — 9
  • Bottom SMT Pads — 0
  • Vias — 7
  • Nets — 1

Application areas

  • GPS antennas
  • Missile-borne systems and guidance electronics
  • Fuzes and proximity sensors
  • Miniaturized antennas (phased array, patch antennas)
  • Beidou navigation systems
  • High-frequency RF and microwave circuits
  • Satellite communication equipment

Properties

TP440 Typical Properties

PropertyTP440Dir.UnitsConditionTest Method
CompositionPPE / Ceramic (Molded)———Wangling official
Dielectric Constant (Process)4.40 ± 0.09Z—5 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)—Z——Wangling design value
Dissipation Factor0.0010Z—5 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-46—ppm/°C—Wangling official
CTE (Z)70Zppm/°C—Wangling official
Copper Peel Strength——lbs/in——
FlammabilityV-0———UL 94

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Important Process Considerations

This material is not suitable for 260°C thermal shock testing

Cannot be wave soldered

Hand soldering with a constant temperature soldering iron is recommended

Reflow soldering is generally not advised; if necessary, maximum temperature should not exceed 200°C

Multilayer processing requires careful consideration with low-temperature bonding sheets

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com