BICHENGPCBBicheng Technologies Limited

TF440 25mil PTFE Ceramic Composite PCB for Microwave & Millimeter-Wave Applications

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

Wangling's TF440 high frequency material is a high-performance substrate composed of polytetrafluoroethylene (PTFE) resin with excellent microwave properties and temperature resistance, combined with ceramic fillers. It contains no woven glass fabric in its composition, with the dielectric constant precisely calibrated by adjusting the ratio of ceramic to PTFE resin. Manufactured with a special process, the TF series offers outstanding dielectric performance and high reliability.

This 2-layer rigid PCB is constructed entirely with TF440 as the core material at 25mil (0.635mm) thickness, with immersion gold surface finish and 1oz copper on both sides. Its DK of 4.4 offers excellent high-frequency performance, making it ideal for demanding applications such as aerospace equipment, microwave antennas, phased array radars, satellite communications, and power amplifiers.

The TF series is a high-performance substrate composed of polytetrafluoroethylene (PTFE) resin with excellent microwave properties and temperature resistance, combined with ceramic fillers. The material contains no woven glass fabric. By adjusting the ratio of ceramic to PTFE resin, the dielectric constant can be precisely controlled. Manufactured with a special process, the TF series offers outstanding dielectric performance and high reliability. In this series, TF refers to unclad smooth material, TF-1 refers to single-sided copper clad, and TF-2 refers to double-sided copper clad.

TF440 features a dielectric constant of 4.4±0.09 at 10GHz, ultra-low dissipation factor of 0.0010, and excellent thermal stability. The material operates reliably across a wide temperature range from -80°C to +200°C and is easy to machine, supporting standard PCB fabrication processes. The long-term operating temperature is significantly higher than TP materials, making it ideal for demanding aerospace and defense applications.

Technical features & benefits

  • Dielectric Constant (DK): 4.4 ± 0.09 at 10GHz
  • Dissipation Factor (Df): 0.0010 at 10GHz
  • Thermal Coefficient of DK (TCDK): -60 ppm/°C
  • Coefficient of Thermal Expansion (CTE): X=60 ppm/°C, Y=60 ppm/°C, Z=80 ppm/°C
  • Operating Temperature Range: -80°C to +200°C
  • Thermal Conductivity: 0.32 W/(M·K)
  • Density: 2.58 g/cm³
  • No glass fiber reinforcement — uniform dielectric properties
  • Radiation resistance and low outgassing
  • Water absorption: ≤0.05%
  • Easy PCB fabrication with standard thermoplastic manufacturing methods
  • Stable DK (4.4±0.09) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0010) — Excellent high-frequency performance with minimal signal loss
  • No Glass Fiber Reinforcement — Uniform dielectric properties and consistent performance
  • Wide Operating Temperature (-80°C to +200°C) — Superior to TP materials, reliable in extreme environments
  • Excellent Radiation Resistance — Ideal for aerospace, space, and defense applications
  • High Reliability — Superior dielectric performance for critical applications
  • Easy Machinability — Supports standard thermoplastic processing methods
  • Immersion Gold Finish — Excellent solderability and corrosion resistance
  • Feature — Benefit
  • DK 4.4 ± 0.09 @ 10GHz — Stable dielectric constant for consistent impedance control
  • Df 0.0010 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
  • TCDK: -60 ppm/°C — Stable electrical performance over temperature
  • CTE: 60/60/80 ppm/K — Good dimensional stability
  • Operating temp: -80°C to +200°C — Superior to TP materials, reliable in extreme environments
  • Thermal conductivity 0.32 W/m/K — Efficient heat removal
  • Radiation resistance — Ideal for aerospace, space, and defense applications

Product images

TF440 PCB
TF440 Material

PCB specifications

ItemSpecification
Base materialWangling TF440 (PTFE + Ceramic Composite)
Layer count2-Layer
Board dimensions45mm x 66.04mm = 1 PCS, ±0.15mm
Minimum Trace/Space7/8 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.7mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Copper filling viasOn designated IC Pad
100% Electrical testUsed prior to shipment
ParameterOptions
Standard Thicknesses0.635mm (25mil), 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm (± tolerance per thickness)
Standard Panel Sizes150x150mm, 250x250mm
Standard CladdingsED Copper: 0.018mm (½ oz), 0.035mm (1 oz); additional claddings available
DK Options (TF Series)3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 16.0 (customizable 3.0-16)

Layer stack-up

  • Layer:Copper_layer_1 (Top);Material:Copper;Thickness:35 μm (1 oz)
  • Layer:Dielectric;Material:TF440 Core;Thickness:0.635 mm (25mil)
  • Layer:Copper_layer_2 (Bottom);Material:Copper;Thickness:35 μm (1 oz)

PCB Statistics

  • Parameter — Value
  • Components — 60
  • Total Pads — 45
  • Thru Hole Pads — 27
  • Top SMT Pads — 18
  • Bottom SMT Pads — 0
  • Vias — 26
  • Nets — 2

Application areas

  • Microwave and millimeter-wave circuits
  • Aerospace equipment, space and cabin equipment
  • Phased array antennas, phase-sensitive antennas
  • RF front-end modules, low-noise amplifiers (LNAs)
  • Satellite communication systems
  • High-reliability RF passive components

Properties

TF440 Typical Properties

PropertyTF440Dir.UnitsConditionTest Method
CompositionPTFE / Ceramic (Molded)———Wangling official
Dielectric Constant (Process)4.40 ± 0.09Z—5 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)—Z——Wangling design value
Dissipation Factor0.0010Z—5 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-60—ppm/°C—Wangling official
CTE (Z)80Zppm/°C—Wangling official
Copper Peel Strength——lbs/in——
FlammabilityV-0———UL 94

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com