TF300 25mil PTFE Ceramic Composite PCB for Microwave & Millimeter-Wave Applications
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Brief introduction
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
Wangling's TF300 high frequency material is a composite of PTFE resin with excellent microwave performance and temperature resistance and ceramic materials. It contains no glass fiber cloth in its composition, with the dielectric constant precisely calibrated by adjusting the ratio of ceramic to PTFE resin. Adopting a specialized manufacturing process, it delivers superior dielectric performance and high reliability.
This 2-layer rigid PCB is constructed entirely with TF300 as the core material at 25mil (0.635mm) thickness, with immersion gold surface finish and 1oz copper on both sides. Its DK of 3.0 offers excellent high-frequency performance, making it ideal for demanding applications such as aerospace equipment, microwave antennas, phased array radars, satellite communications, and power amplifiers.
This product is composed of PTFE resin with excellent microwave performance and temperature resistance, compounded with ceramic materials. It contains no glass fiber cloth, with the dielectric constant precisely calibrated by adjusting the ratio of ceramic to PTFE resin. Adopting a specialized manufacturing process, it delivers superior dielectric performance and high reliability. TF refers to the smooth surface material without copper cladding, TF-1 has copper cladding on one side, and TF-2 has copper cladding on both sides.
TF300 features a dielectric constant of 3.0±0.06 at 10GHz, ultra-low dissipation factor of 0.0010, and excellent thermal stability. The material operates reliably across a wide temperature range from -80°C to +200°C and is easy to machine, supporting standard PCB fabrication processes. The long-term operating temperature is significantly higher than TP materials, making it ideal for demanding aerospace and defense applications.
Technical features & benefits
- Dielectric Constant (DK): 3.0 ± 0.06 at 10GHz
- Dissipation Factor (Df): 0.0010 at 10GHz
- Thermal Coefficient of DK (TCDK): -60 ppm/°C
- Coefficient of Thermal Expansion (CTE): X=60 ppm/°C, Y=60 ppm/°C, Z=80 ppm/°C
- Operating Temperature Range: -80°C to +200°C
- Thermal Conductivity: 0.30 W/(M·K)
- Density: 2.41 g/cm³
- No glass fiber reinforcement — uniform dielectric properties
- Radiation resistance and low outgassing
- Water absorption: ≤0.05%
- Easy PCB fabrication with standard thermoplastic manufacturing methods
- Stable DK (3.0±0.06) — Consistent impedance control for high-frequency designs
- Ultra-Low Df (0.0010) — Excellent high-frequency performance with minimal signal loss
- No Glass Fiber Reinforcement — Uniform dielectric properties and consistent performance
- Wide Operating Temperature (-80°C to +200°C) — Superior to TP materials, reliable in extreme environments
- Excellent Radiation Resistance — Ideal for aerospace, space, and defense applications
- High Reliability — Superior dielectric performance for critical applications
- Easy Machinability — Supports standard thermoplastic processing methods
- Immersion Gold Finish — Excellent solderability and corrosion resistance
- Feature — Benefit
- DK 3.0 ± 0.06 @ 10GHz — Stable dielectric constant for consistent impedance control
- Df 0.0010 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
- TCDK: -60 ppm/°C — Stable electrical performance over temperature
- CTE: 60/60/80 ppm/K — Good dimensional stability
- Operating temp: -80°C to +200°C — Superior to TP materials, reliable in extreme environments
- Thermal conductivity 0.30 W/m/K — Efficient heat removal
- Radiation resistance — Ideal for aerospace, space, and defense applications
Product images
PCB specifications
| Item | Specification |
| Base material | Wangling TF300 (PTFE + Ceramic Composite) |
| Layer count | 2-layer |
| Board dimensions | 70mm x 49mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 5/5 mils |
| Minimum Hole Size | 0.3mm |
| Blind vias | No |
| Finished board thickness | 0.7mm (25mil core + copper) |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) all layers |
| Via plating thickness | 20 μm |
| Surface finish | Immersion Gold |
| Top Silkscreen | No |
| Bottom Silkscreen | No |
| Top Solder Mask | No |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Parameter | Options |
| Standard Thicknesses | 0.635mm (25mil), 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm (± tolerance per thickness) |
| Standard Panel Sizes | 150x150mm, 250x250mm |
| Standard Claddings | ED Copper: 0.018mm (½ oz), 0.035mm (1 oz); additional claddings available |
| DK Options (TF Series) | 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 16.0 (customizable 3.0-16) |
Layer stack-up
- Layer:Copper_layer_1 (Top);Material:Copper;Thickness:35 μm (1 oz)
- Layer:Dielectric;Material:TF300 Core;Thickness:0.635 mm (25mil)
- Layer:Copper_layer_2 (Bottom);Material:Copper;Thickness:35 μm (1 oz)
PCB Statistics
- Parameter — Value
- Components — 25
- Total Pads — 66
- Thru Hole Pads — 39
- Top SMT Pads — 27
- Bottom SMT Pads — 0
- Vias — 16
- Nets — 2
Application areas
- Aerospace equipment, space systems, in-cabin equipment, aircraft
- Microwave and millimeter-wave circuits
- Antennas and phase-sensitive antennas
- Early warning radars and airborne radars
- Phased array antennas and beamforming networks
- Satellite communications and navigation systems
- Power amplifiers and combiners
Properties
TF300 Typical Properties
| Property | TF300 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Composition | PTFE / Ceramic (Molded) | — | — | — | Wangling official |
| Dielectric Constant (Process) | 3.00 ± 0.06 | Z | — | 5 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | — | Z | — | — | Wangling design value |
| Dissipation Factor | 0.0010 | Z | — | 5 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -60 | — | ppm/°C | — | Wangling official |
| CTE (Z) | 80 | Z | ppm/°C | — | Wangling official |
| Copper Peel Strength | — | — | lbs/in | — | — |
| Flammability | V-0 | — | — | — | UL 94 |
Quality Assurance
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
