Taconic RF-35TC High Frequency Printed Circuit Board 30mil (0.762mm) RF-35TC PCB with Black Solder Mask for Antennas
(Printed Circuit Boards are custom-made products; the images and specifications provided are for reference only.)
Brief introduction
RF-35TC is a high-frequency material developed by Taconic. This substrate boasts a "best-in-class" low dissipation factor and exceptional thermal conductivity, making it ideal for high-power applications where every 1/10th of a dB is crucial. The PCB substrate effectively dissipates heat from both transmission lines and surface mount components, such as transistors.
RF-35TC is constructed from a PTFE-based, ceramic-filled fiberglass substrate. Unlike synthetic rubber (hydrocarbon) alternatives, it does not oxidize, yellow, or experience upward drift in dielectric constant and dissipation factor.
With a low dielectric constant of 3.50 and an extremely low dissipation factor of 0.0011, this laminate ensures minimal energy loss. It also bonds exceptionally well to low-profile copper, further reducing insertion loss.
RF-35TC laminates are perfectly suited for a variety of applications, including antennas, satellites, filters, couplers, and power amplifiers.
Product images
PCB specifications
Taconic RF-35TC 30mil 0.762mm High Frequency PCB for Antennas
| PCB SIZE | 90 x 45mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 4 mil / 5 mil |
| Minimum / Maximum Holes: | 0.4 mm / 5.5 mm |
| Number of Different Holes: | 9 |
| Number of Drill Holes: | 21 |
| Number of Milled Slots: | 1 |
| Number of Internal Cutouts: | 1 |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RF-35TC 0.762mm |
| Final foil external: | 1.5 oz |
| Final foil internal: | N/A |
| Final height of PCB: | 0.8 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | ENIG |
| Solder Mask Apply To: | TOP, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing |
| MARKING | — |
| Side of Component Legend | TOP |
| Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | — |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RF-35TC 0.762mm
- copper ------- 35um(1oz) + plate BOT Layer
Properties
RF-35TC Typical Properties
| Property | RF-35TC | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Composition | PTFE Ceramic - Glass | — | — | — | — |
| Dielectric Constant, Dk @ 10 GHz | 3.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dk Tolerance | ±0.05 | — | — | — | — |
| Dissipation Factor, Df @ 10 GHz | 0.0011 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Moisture Absorption | 0.05 | — | % | — | ASTM D570 |
| Thermal Conductivity | 0.60 | Z | W/(m·K) | — | — |
| CTE (X) | 11 | X | ppm/°C | — | — |
| CTE (Y) | 13 | Y | ppm/°C | — | — |
| CTE (Z) | 34 | Z | ppm/°C | — | — |
| Peel Strength (1 oz Cu) | 7 | — | lbs/in | — | — |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
