Taconic RF-35TC High Frequency Printed Circuit Board 10mil 0.254mm RF-35TC Microwave PCB with Immersion Gold
(Please note: Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only.)
Brief introduction
The Taconic RF-35TC is a premier high frequency material specifically designed for advanced applications. This PCB substrate boasts an exceptional low dissipation factor combined with high thermal conductivity, making it ideal for high power scenarios where precision is crucial. Every fraction of a dB matters, and RF-35TC effectively dissipates heat from both transmission lines and surface mount components, such as transistors.
RF-35TC consists of a PTFE-based, ceramic-filled fiberglass substrate. Unlike synthetic rubber (hydrocarbon) alternatives, it is resistant to oxidation, yellowing, and drift in dielectric constant and dissipation factor over time.
Product images
PCB specifications
Taconic RF-35TC 10mil 0.254mm High Frequency PCB for Power Amplifiers and Antennas
| PCB SIZE | 75 x 86mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 7.1 mil / 5 mil |
| Minimum / Maximum Holes: | 0.4 mm / 5.2 mm |
| Number of Different Holes: | 6 |
| Number of Drill Holes: | 41 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 3 |
| Impedance Control: | no |
| BOARD MATERIAL | — |
| Glass Epoxy: | RF-35TC 0.254mm |
| Final foil external: | 1.5 oz |
| Final foil internal: | N/A |
| Final height of PCB: | 0.3 mm ±0.1mm |
| PLATING AND COATING | — |
| Surface Finish | Immersion gold |
| Solder Mask Apply To: | TOP, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing |
| MARKING | — |
| Side of Component Legend | TOP |
| Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | — |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RF-35TC 0.254mm
- copper ------- 35um(1oz) + plate BOT Layer
Application areas
RF-35TC laminates are perfectly suited for a variety of high-performance applications, including:
- Power Amplifiers
- Antennas
- Satellite communications equipment
- Filters
- Couplers
Properties
RF-35TC Typical Properties
| Property | RF-35TC | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Composition | PTFE Ceramic - Glass | — | — | — | — |
| Dielectric Constant, Dk @ 10 GHz | 3.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dk Tolerance | ±0.05 | — | — | — | — |
| Dissipation Factor, Df @ 10 GHz | 0.0011 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Moisture Absorption | 0.05 | — | % | — | ASTM D570 |
| Thermal Conductivity | 0.60 | Z | W/(m·K) | — | — |
| CTE (X) | 11 | X | ppm/°C | — | — |
| CTE (Y) | 13 | Y | ppm/°C | — | — |
| CTE (Z) | 34 | Z | ppm/°C | — | — |
| Peel Strength (1 oz Cu) | 7 | — | lbs/in | — | — |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
