BICHENGPCBBicheng Technologies Limited

Rogers TMM10i Microwave Printed Circuit Board 75mil 1.905mm RF PCB With Pure Gold Plated

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

This type of Microwave PCB is built on a 75 mil TMM10i substrate with 1 oz copper (finished). It is a double-layer board without solder mask and silkscreen. The surface finish on pads is pure gold plated with 80 micro inches, with no nickel under gold. The boards are manufactured according to IPC Class II standards, with every 25 boards packed for shipment.

Product images

TMM10i PCB

Application areas

  • Chip Testers
  • Dielectric Polarizers and Lenses
  • Filters and Couplers
  • Global Positioning Systems Antennas
  • Patch Antennas
  • Power Amplifiers and Combiners
  • RF and Microwave Circuitry
  • Satellite Communication Systems

Our PCB Capability

PCB SIZE75 x 68mm = 1up
BOARD TYPEDouble sided PCB
Number of Layers2 layers
Surface Mount ComponentsYES
Through Hole ComponentsNO
LAYER STACKUPcopper - 17um(0.5 oz)+plate TOP layer
TMM10i 1.905mm
copper - 17um(0.5 oz)+plate BOT Layer
Minimum Trace and Space:10 mil / 10 mil
Minimum / Maximum Holes:0.45 mm / 3.50 mm
Number of Drill Holes:3
Surface FinishPure Gold-Plated (No nickel under gold), 52%
Final height of PCB:2.0 mm ±0.1
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally

PCB Capability (TMM10i)

PCB Material:Ceramic, Hydrocarbon, Thermoset Polymer Composites
Designation:TMM10i
Dielectric constant:9.80 ± 0.245
Layer count:Double Layer, Multilayer, Hybrid PCB
Copper weight:0.5oz, 1oz, 2oz
PCB thickness:15mil~500mil
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion tin, OSP, Pure Gold Plated (No Nickel under gold) etc.

Properties

TMM 10i Typical Properties

PropertyTMM 10iDir.UnitsConditionTest Method
Dielectric Constant (Process)9.80 ± 0.245Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)9.9Z——Microstrip
Dissipation Factor0.0020Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-43—ppm/°C-50 to 150°CIPC-TM-650 2.5.5.5
Volume Resistivity2 × 10⁸—MΩ·cmCondition AASTM D257
Surface Resistivity4 × 10⁷—MΩCondition AASTM D257
Moisture Absorption0.16—%D24/50ASTM D570
Thermal Conductivity0.76ZW/(m·K)50°CASTM D5470
CTE (X)19Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)19Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)20Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength5.0 (0.9)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density2.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com