Rogers TMM10i Microwave Printed Circuit Board 15mil 25mil 50mil 75mil TMM10i RF PCB with Immersion Gold
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- Material
- Rogers TMM10i (Ceramic Hydrocarbon Thermoset) / 15-75mil
- MOQ
- 1PCS
- Lead time
- 7-13 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers' TMM10i thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high reliability in plated-thru-hole stripline and microstrip applications. These laminates combine the benefits of both ceramic and traditional PTFE microwave circuit laminates without requiring specialized production techniques.
TMM10i laminates feature an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The isotropic coefficients of thermal expansion are closely matched to copper, allowing for the reliable production of plated-through holes and minimal etch shrinkage. Additionally, the thermal conductivity of TMM10i laminates is approximately twice that of traditional PTFE/ceramic laminates, facilitating effective heat removal.
As these laminates are based on thermoset resins, they do not soften when heated. This characteristic enables wire bonding of component leads to circuit traces without concerns about pad lifting or substrate deformation.
1. Chip Testers2. Dielectric Polarizers and Lenses3. Filters and Couplers4. Global Positioning Systems Antennas5. Patch Antennas6. Power Amplifiers and Combiners7. RF and Microwave Circuitry8. Satellite Communication Systems
PCB specifications
Typical properties: TMM10i
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant @ 10 GHz | 9.80 ± 0.35 | — | — | — | IPC TM-650 2.5.5.5 |
| Dissipation Factor @ 10 GHz | 0.0020 | — | — | — | IPC TM-650 2.5.5.5 |
| Temperature Coefficient of ε | -30 ppm/°C | — | — | — | IPC TM-650 2.5.5.5 |
| Thermal Conductivity | 0.81 W/mK | — | — | — | ASTM E1461 |
| CTE (x,y) 50-150°C | 8, 10 ppm/°C | — | — | — | IPC TM-650 2.4.41 |
| CTE (z) 50-150°C | 20 ppm/°C | — | — | — | IPC TM-650 2.4.24 |
| Copper Peel Strength | >12 lb/in (2.1 N/mm) | — | — | — | IPC TM-650 2.4.8 |
| Water Absorption | 0.03% | — | — | — | IPC TM-650 2.6.2.1 |
| Flammability | Meets V0 | — | — | — | UL-94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
