Rogers RT/Duroid 5870 High Frequency PCB 10mil (0.254mm) for Commercial Airline Broadband Antennas
(Note: Printed Circuit Boards (PCBs) are custom-made products; the images and specifications provided are for reference only.)
Brief introduction
Rogers RT/Duroid 5870 is a high frequency material composed of glass microfiber reinforced PTFE composites, specifically engineered for demanding stripline and microstrip circuit applications. The unique structure of randomly oriented microfibers ensures exceptional dielectric constant uniformity across panels, maintaining consistency over a wide frequency range.
Additionally, the low dissipation factor of RT/Duroid 5870 makes it suitable for use in Ku-band and higher applications. This material can be easily cut, sheared, and machined into various shapes, exhibiting resistance to solvents and reagents, whether hot or cold, typically used in etching printed circuits or plating edges and holes.
Product images
PCB specifications
RT/Duroid 5870 10mil 0.254mm High Frequency PCB for Commercial Airline Broadband Antennas
| PCB SIZE | 100 x 68mm = 1up |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 8.8 mil / 10.5mil |
| BOARD MATERIAL | — |
| Glass Epoxy: | RT/duroid 5870 0.254mm |
| Final foil external: | 1oz |
| Final height of PCB: | 0.3 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | OSP |
| VIA | NO |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RT/duroid 5870 0.254mm
- copper ------- 35um(1oz)+plate BOT Layer
Application areas
- Commercial airline broadband antennas
- Microstrip circuits
- Stripline circuits
- Millimeter wave applications
- Military radar systems
- Missile guidance systems
- Point-to-point digital radio antennas
Properties
RT/duroid 5870 Typical Properties
| Property | RT/duroid 5870 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant, εr (Process) | 2.332.33±0.02 spec. | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Dielectric Constant, εr (Design) | 2.33 | Z | — | 8 GHz – 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tan δ | 0.00050.0012 | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -115 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁷ | Z | MΩ·cm | C96/35/90 | ASTM D257 |
| Surface Resistivity | 2 × 10⁷ | Z | MΩ | C96/35/90 | ASTM D257 |
| Specific Heat | 0.96 (0.23) | — | J/g·K (cal/g·°C) | — | Calculated |
| Moisture Absorption | 0.02 | — | % | 0.062" (1.6mm) D48/50 | ASTM D570 |
| Thermal Conductivity | 0.22 | Z | W/(m·K) | 80°C | ASTM C518 |
| CTE (X) | 22 | X | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 28 | Y | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 173 | Z | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| Td (Decomposition Temp.) | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.2 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 27.2 (4.8) | — | pli (N/mm) | 1 oz EDC foil after solder float | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
