Rogers RT/Duroid 5870 31mil (0.787mm) High-Frequency PCB for Radar Systems
(Note: Printed Circuit Boards (PCBs) are custom-made products; the images and specifications provided are for reference only.)
Brief introduction
Rogers RT/Duroid 5870 is a high-frequency material composed of glass microfiber reinforced PTFE composites, specifically engineered for demanding stripline and microstrip circuit applications. This material showcases exceptional dielectric constant uniformity, achieved through its randomly oriented microfibers, ensuring consistent performance across panels and stability over a wide frequency range.
Technical features & benefits
- Low Dissipation Factor: The low dissipation factor allows RT/Duroid 5870 to be effective in Ku-band applications and beyond.
- Machinability: This material can be easily cut, sheared, and machined into various shapes.
- Chemical Resistance: It is resistant to all solvents and reagents, whether hot or cold, typically used in the etching of printed circuits or in plating edges and holes.
Product images
PCB specifications
Rogers RT/Duroid 5870 31mil 0.787mm High Frequency PCB for Radar Systems
| PCB SIZE | 110 x 72mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 4.8 mil / 4.5 mil |
| Minimum / Maximum Holes: | 0.3 mm / 4.6 mm |
| Number of Different Holes: | 5 |
| Number of Drill Holes: | 87 |
| Number of Internal Cutouts: | 1 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RT/duroid 5870 0.787mm |
| Final foil external: | 1.0 oz |
| Final height of PCB: | 0.8 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold |
| VIA | Plated through hole(PTH), minimum size 0.3mm. Solder mask uncovered |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RT/duroid 5870 0.787mm
- copper ------- 35um(1oz)+plate BOT Layer
Application areas
- Commercial airline broadband antennas
- Microstrip circuits
- Stripline circuits
- Millimeter wave applications
- Military radar systems
- Missile guidance systems
- Point-to-point digital radio antennas
Properties
RT/duroid 5870 Typical Properties
| Property | RT/duroid 5870 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant, εr (Process) | 2.332.33±0.02 spec. | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Dielectric Constant, εr (Design) | 2.33 | Z | — | 8 GHz – 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tan δ | 0.00050.0012 | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -115 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁷ | Z | MΩ·cm | C96/35/90 | ASTM D257 |
| Surface Resistivity | 2 × 10⁷ | Z | MΩ | C96/35/90 | ASTM D257 |
| Specific Heat | 0.96 (0.23) | — | J/g·K (cal/g·°C) | — | Calculated |
| Moisture Absorption | 0.02 | — | % | 0.062" (1.6mm) D48/50 | ASTM D570 |
| Thermal Conductivity | 0.22 | Z | W/(m·K) | 80°C | ASTM C518 |
| CTE (X) | 22 | X | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 28 | Y | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 173 | Z | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| Td (Decomposition Temp.) | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.2 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 27.2 (4.8) | — | pli (N/mm) | 1 oz EDC foil after solder float | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
