Rogers RO4003C 8mil 0.203mm RF PCB High Frequency Double-Sided PCB for Antenna
(Note: Printed Circuit Boards (PCBs) are custom-made products. The images and specifications provided are for reference only.)
Brief introduction
RO4003C hydrocarbon ceramic laminates are engineered to deliver exceptional high-frequency performance along with cost-effective circuit fabrication. As operational frequencies rise above 500 MHz, the available laminate options for designers decrease significantly. The RO4003C material provides essential properties for RF microwave circuit designers, including matching networks and controlled impedance transmission lines. Its low dielectric loss enables the use of RO4003C in various applications where conventional circuit board materials may falter at higher operating frequencies.
The temperature coefficient of dielectric constant in RO4003C is among the lowest in PCB materials, ensuring stability across a wide frequency range. Additionally, the thermal coefficient of expansion (CTE) of RO4003C offers multiple advantages for PCB designers. Its expansion coefficient closely matches that of copper, which contributes to excellent dimensional stability—crucial for mixed-dielectric multi-layer board constructions. Furthermore, the low Z-axis CTE of RO4003C guarantees reliable plated through-hole quality, even under extreme thermal shock conditions. With a glass transition temperature (Tg) exceeding 280°C, RO4003C maintains stable expansion characteristics throughout the entire spectrum of PCB processing temperatures.
Product images
PCB specifications
Rogers 8mil 0.203mm RO4003C High Frequency PCB Double Sided RF PCB for Antennas
| PCB SIZE | 58 x 110mm = 1up |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 6 mil / 11 mil |
| Minimum / Maximum Holes: | 0.4 mm / 0.4 mm |
| Number of Drill Holes: | 3 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO4003C Tg280℃, εr<3.48, Rogers Corp. |
| Final foil external: | 1.5 oz |
| Final height of PCB: | 0.3 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion gold, 19.5% |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RO4003C 0.203mm
- copper ------- 35um(1oz)+plate BOT Layer
Application areas
- Automotive Radar and Sensors
- Cellular Base Station Antennas
- Direct Broadcast Satellites
- Low Noise Block
- Power Amplifiers
- RFID
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
