Rogers RO4003C 12mil 0.305mm High Frequency PCB Double-Sided RF PCB for Antennas
(Note: Printed Circuit Boards (PCBs) are custom-made products. The images and specifications provided are for reference purposes only.)
Brief introduction
RO4003C hydrocarbon ceramic laminates are engineered to deliver outstanding high-frequency performance while ensuring cost-effective circuit fabrication. When operational frequencies reach 500 MHz and higher, the options for laminate materials available to designers become significantly limited. The RO4003C material has been specifically developed to meet the stringent requirements of RF microwave circuits, matching networks, and controlled impedance transmission lines. Its low dielectric loss makes it suitable for various applications where conventional circuit board materials fall short due to high-frequency limitations.
Product images
PCB specifications
Rogers 12mil 0.305mm RO4003C High Frequency PCB Double Sided RF PCB for Antennas
| PCB SIZE | 67 x 67mm=1up |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| TECHNOLOGY | — |
| Minimum Trace and Space: | 7.9 mil / 5.9 mil |
| Minimum / Maximum Holes: | 0.4 mm / 0.4 mm |
| Number of Different Holes: | 1 |
| Number of Drill Holes: | 3 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO4003C Tg280℃, er<3.48, Rogers Corp. |
| Final foil external: | 1.5 oz |
| Final foil internal: | N/A |
| Final height of PCB: | 0.4 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion gold, 18% |
| Solder Mask Apply To: | N/A |
| Solder Mask Color: | N/A |
| Solder Mask Type: | N/A |
| CONTOUR/CUTTING | Routing |
| MARKING | — |
| Side of Component Legend | N/A |
| Colour of Component Legend | N/A |
| Manufacturer Name or Logo: | N/A |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | N/A |
| DIMENSION TOLERANCE | — |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RO4003C 0.305mm
- copper ------- 35um(1oz) + plate BOT Layer
Application areas
- Automotive Radar and Sensors
- Cellular Base Station Antennas
- Direct Broadcast Satellites
- Low Noise Block (LNB) Converters
- Power Amplifiers
- RFID Technology
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
RO4003C PCB Characteristics
The temperature coefficient of dielectric constant for RO4003C is among the lowest available in circuit board materials. Additionally, the dielectric constant remains stable across a wide frequency spectrum. One of the key advantages of RO4003C is its thermal coefficient of expansion (CTE), which is comparable to that of copper, resulting in excellent dimensional stability. This property is essential for the construction of mixed-dielectric multi-layer boards. The low Z-axis CTE ensures reliable plated through-hole quality, even under extreme thermal shock conditions. With a glass transition temperature (Tg) exceeding 280°C, RO4003C maintains stable expansion characteristics throughout all PCB processing temperatures.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
