Rogers RO3010 RF Printed Circuit Board 2-Layer Rogers 3010 50mil 1.27mm Microwave PCB with Immersion Silver
(Note: Printed Circuit Boards (PCBs) are custom-made products. The images and specifications provided are for reference only.)
Brief introduction
Rogers RO3010 high frequency circuit materials are ceramic-filled PTFE composites specifically designed for commercial microwave and RF applications. These materials are engineered to provide exceptional electrical and mechanical stability at competitive prices. The consistent mechanical properties facilitate the development of multi-layer board designs without encountering warpage or reliability issues.
Notably, RO3010 materials feature a coefficient of thermal expansion (CTE) of 17 ppm/℃ in both the X and Y axes. This closely matched expansion coefficient with copper ensures excellent dimensional stability, with typical etch shrinkage of less than 0.5 mils per inch after etching and baking. The Z-axis CTE is 24 ppm/℃, providing exceptional reliability for plated through-holes, even in harsh environments.
Product images
PCB specifications
Rogers RO3010 50mil 1.270mm High Frequency PCB for Power Amplifiers and Antennas
| PCB SIZE | 75 x 80 mm = 1 PCS |
| BOARD TYPE | High Frequency PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| TECHNOLOGY | — |
| Minimum Trace and Space: | 5.8mil/5.4mil |
| Minimum / Maximum Holes: | 0.4mm / 0.6mm |
| Number of Different Holes: | 1 |
| Number of Drill Holes: | 4 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO3010 1.270mm |
| Final foil external: | 1oz |
| Final foil internal: | 0oz |
| Final height of PCB: | 1.4mm ± 10% |
| PLATING AND COATING | — |
| Surface Finish | Immersion Silver |
| Solder Mask Apply To: | TOP |
| Solder Mask Color: | Green |
| CONTOUR/CUTTING | Routing, V-cut |
| MARKING | TOP, White legend |
| VIA | Plated through hole(PTH) |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 18um(0.5 oz)+plate TOP layer
- RO3010 1.270mm
- copper ------- 18um(0.5 oz)+plate BOT Layer
Application areas
- Automotive radar systems
- Cellular telecommunications systems
- Datalink on cable systems
- Direct broadcast satellites
- Global positioning satellite antennas
- Patch antennas for wireless communications
- Power amplifiers and antennas
- Power backplanes
- Remote meter readers
Properties
RO3010 Typical Properties
| Property | RO3010 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Design) | 6.50 | — | — | 8–40 GHz | Differential Phase Length |
| Dissipation Factor | 0.0020 | — | — | 23°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -262 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁵ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10⁵ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| CTE (X) | 17 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 17 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 24 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.79 | — | W/(m·K) | 50°C | ASTM D5470 |
| Copper Peel Strength | 7.1 | — | lbs/in | 1 oz EDC after solder float | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.02 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Density | 2.6 | — | g/cm³ | 23°C | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
