Rogers 3010 PCB RO3010 High Frequency PCB With 5mil, 10mil, 25mil and 50mil Coating Immersion Silver, Gold, Tin and HASL
(Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only)
Brief introduction
Rogers RO3010 high frequency circuit materials are ceramic-filled PTFE composites, ideal for commercial microwave and RF applications. These materials offer exceptional electrical performance and mechanical stability at competitive prices. The consistent mechanical properties enable designers to create multi-layer board designs without issues such as warpage or reliability concerns.
Technical features & benefits
- Coefficient of Thermal Expansion (CTE): The X and Y-axis CTE is 17 ppm/℃, perfectly matched to that of copper. This ensures excellent dimensional stability with typical etch shrinkage of less than 0.5 mils per inch post-etch and bake.
- Z-axis CTE: At 24 ppm/℃, this provides outstanding plated through-hole reliability, even in harsh environments.
Product images
PCB specifications
Rogers RO3010 10mil 0.254mm High Frequency PCB for Direct Broadcast Satellites
| PCB SIZE | 91 x 85mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 4 mil / 8 mil |
| Minimum / Maximum Holes: | 0.4mm / 0.8mm |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control: | no |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO3010 0.254mm |
| Final foil external: | 1 oz |
| Final height of PCB: | 0.3 mm ±0.1mm |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold |
| Solder Mask Apply To: | Bottom, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing |
| VIA | N/A |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 18um(0.5 oz)+plate TOP layer
- RO3010 0.254mm
- copper ------- 18um(0.5 oz) + plate BOT Layer
Application areas
- Automotive radar systems
- Cellular telecommunications
- Datalink on cable systems
- Direct broadcast satellites
- Global positioning satellite antennas
- Patch antennas for wireless communications
- Power amplifiers and antennas
- Power backplanes
- Remote meter readers
Properties
RO3010 Typical Properties
| Property | RO3010 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Design) | 6.50 | — | — | 8–40 GHz | Differential Phase Length |
| Dissipation Factor | 0.0020 | — | — | 23°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -262 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁵ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10⁵ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| CTE (X) | 17 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 17 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 24 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.79 | — | W/(m·K) | 50°C | ASTM D5470 |
| Copper Peel Strength | 7.1 | — | lbs/in | 1 oz EDC after solder float | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.02 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Density | 2.6 | — | g/cm³ | 23°C | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
Note: This page carried an inconsistent legacy field on the old site. It has been corrected to match the actual page content and is queued for human review.
