Rogers RO3003 RF Printed Circuit Board 2-Layer Rogers 3003 60mil 1.524mm PCB with Low DK3.0 and Low DF 0.001
(Note: Printed Circuit Boards (PCBs) are custom-made products. The images and specifications provided are for reference only.)
Brief introduction
The Rogers RO3003 high frequency circuit materials are crafted from ceramic-filled PTFE composites, specifically designed for commercial microwave and RF applications. These materials deliver exceptional electrical and mechanical stability at competitive prices. Their consistent mechanical properties enable designers to create multi-layer board designs without issues related to warpage or reliability.
The RO3003 materials feature a coefficient of thermal expansion (CTE) of 17 ppm/℃ in both the X and Y axes, closely matching that of copper. This compatibility results in excellent dimensional stability, with typical etch shrinkage after processing being less than 0.5 mils per inch. The Z-axis CTE is 24 ppm/℃, ensuring outstanding reliability for plated through-holes, even in severe environments.
Product images
PCB specifications
Rogers RO3003 60mil 1.524mm High Frequency PCB DK3.0 RF PCB for Power Amplifiers and Antennas
| PCB SIZE | 88 x 92mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 5 mil / 5 mil |
| Minimum / Maximum Holes: | 0.4 mm / 5.2 mm |
| Number of Different Holes: | 7 |
| Number of Drill Holes: | 95 |
| Number of Internal Cutouts: | 3 |
| BOARD MATERIAL | — |
| Base Material: | RO3003 1.524mm |
| Final foil external: | 1oz |
| Final height of PCB: | 1.6 mm ±10% |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold |
| Solder Mask Apply To: | NO |
| CONTOUR/CUTTING | Routing |
| MARKING | TOP, Black legend |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 18um(0.5 oz)+plate TOP layer
- RO3003 1.524mm
- copper ------- 18um(0.5 oz) + plate BOT Layer
Application areas
- Automotive radar systems
- Cellular telecommunications networks
- Datalink over cable systems
- Direct broadcast satellite technology
- Global Positioning System (GPS) antennas
- Patch antennas for wireless communication
- Power amplifiers and antennas
- Power backplanes
- Remote meter reading devices
Properties
RO3003 Typical Properties
| Property | RO3003 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Design) | 3.00 | — | — | 8–40 GHz | Differential Phase Length |
| Dissipation Factor | 0.0010 | — | — | 23°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -3 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁷ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10⁷ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| CTE (X) | 17 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 16 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 25 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.50 | — | W/(m·K) | 50°C | ASTM D5470 |
| Copper Peel Strength | 12.7 | — | lbs/in | 1 oz EDC after solder float | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.04 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Density | 2.1 | — | g/cm³ | 23°C | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
