Rogers RO3003 High Frequency PCB 2-Layer Rogers 3003 10mil Circuit Board | DK3.0 | DF 0.001 Microwave PCB
(Note: Printed Circuit Boards are custom-made products; images and parameters are for reference only.)
Brief introduction
Rogers RO3003 high frequency circuit materials consist of ceramic-filled PTFE composites, specifically designed for commercial microwave and RF applications. These materials provide exceptional electrical performance and mechanical stability at competitive prices, ensuring consistent mechanical properties. Designers can develop multi-layer board configurations without facing issues like warpage or reliability concerns.
The RO3003 materials feature a coefficient of thermal expansion (CTE) of 17 ppm/℃ in both the X and Y axes, closely matching that of copper. This compatibility results in excellent dimensional stability, with typical etch shrinkage after processing being less than 0.5 mils per inch. The Z-axis CTE is 24 ppm/℃, ensuring outstanding reliability for plated through-holes, even in challenging environments.
Product images
PCB specifications
Rogers RO3003 10mil 0.254mm High Frequency PCB DK3.0 RF PCB for Automotive Radar Applications
| PCB SIZE | 100 x 100mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | NO |
| Through Hole Components | NO |
| Minimum Trace and Space: | 5mil / 5mil |
| Minimum / Maximum Holes: | 0.3mm / 0.8mm |
| BOARD MATERIAL | — |
| Base Material: | RO3003 0.254mm |
| Final foil external: | 1oz |
| Final height of PCB: | 0.3 mm ±0.1 |
| CONTOUR/CUTTING | Routing |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
The RO3003 high frequency PCBs come in double-sided, multi-layer, and hybrid constructions, with copper weights ranging from 0.5oz to 2oz and thicknesses from 0.3mm to 1.6mm. The maximum size available is 400mm x 500mm, with surface finishes including bare copper, hot air leveling, and immersion gold.
Layer stack-up
- copper ------- 35um(1 oz)
- RO3003 0.254mm
Application areas
- Automotive radar systems
- Cellular telecommunications networks
- Datalink over cable systems
- Direct broadcast satellite technology
- Global Positioning System (GPS) antennas
- Patch antennas for wireless communication
- Power amplifiers and antennas
- Power backplanes
- Remote meter reading devices
Properties
RO3003 Typical Properties
| Property | RO3003 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Design) | 3.00 | — | — | 8–40 GHz | Differential Phase Length |
| Dissipation Factor | 0.0010 | — | — | 23°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -3 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁷ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10⁷ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| CTE (X) | 17 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 16 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 25 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.50 | — | W/(m·K) | 50°C | ASTM D5470 |
| Copper Peel Strength | 12.7 | — | lbs/in | 1 oz EDC after solder float | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.04 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Density | 2.1 | — | g/cm³ | 23°C | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
