Rogers RF PCBs Built on RO3210 50mil, 1.27mm, DK10.2 with Immersion Gold for Microstrip Patch Antennas
(Note: Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only.)
Brief introduction
Rogers RO3210 high-frequency circuit materials consist of ceramic-filled laminates reinforced with woven fiberglass. These advanced materials are designed to deliver exceptional electrical performance and mechanical stability.
Today, we will discuss the RO3210 high frequency PCBs.
RO3210 high frequency circuit laminates are ceramic-filled materials reinforced with woven fiberglass. This material is an extension of the RO3000 series, featuring one key advantage—enhanced mechanical stability.
Product images
PCB specifications
Rogers RO3210 50mil 1.27mm High Frequency PCB for Microstrip Patch Antennas
| PCB SIZE | 102 x 102mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 6 mil / 4 mil |
| Minimum / Maximum Holes: | 0.4 mm / 2.5 mm |
| Number of Different Holes: | 8 |
| Number of Drill Holes: | 32 |
| BOARD MATERIAL | — |
| Base Material: | RO3210 1.270mm |
| Final foil external: | 1 oz |
| Final foil internal: | 1 oz |
| Final height of PCB: | 1.3 mm ±10% |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold |
| CONTOUR/CUTTING | Routing |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 18µm(0.5 oz)+plate TOP layer
- RO3210 1.270mm
- copper ------- 18µm(0.5 oz)+plate BOT layer
Application areas
- Automotive Collision Avoidance Systems
- Automotive Global Positioning Satellite Antennas
- Base Station Infrastructure
- Datalink on Cable Systems
- Direct Broadcast Satellite
- LMDS and Wireless Broadband
- Microstrip Patch Antennas for Wireless Communications
- Power Backplanes
- Remote Meter Readers
- Wireless Telecommunications Systems
Properties
RO3210 Typical Properties
| Property | RO3210 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 10.20 ± 0.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 10.8 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -459 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10³ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10³ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.12 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.81 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 13 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 13 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 34 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 11.0 (1.9) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 3.0 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
