Rogers RF PCB Built on RO3210 25mil (0.635mm) DK10.2 with Immersion Gold for Automotive Collision Avoidance Systems
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Rogers RO3210 high-frequency circuit materials consist of ceramic-filled laminates reinforced with woven fiberglass. These materials are specifically engineered to provide outstanding electrical performance and mechanical stability. The RO3210 laminates feature the surface smoothness typically associated with non-woven PTFE laminates.
Due to their compatibility with standard PTFE circuit board processing techniques, these materials can be efficiently produced in mass quantities, resulting in competitive pricing in the marketplace. The RO3210 substrate has a dielectric constant of 10.2 and a low dissipation factor of 0.0027.
Product images
PCB specifications
Rogers RO3210 25mil 0.635mm High Frequency PCB for Automotive Collision Avoidance Systems
| PCB SIZE | 35 x 77 mm = 2 designs = 2PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 6 mil / 6 mil |
| Minimum / Maximum Holes: | 0.3 mm / 5.6 mm |
| Number of Different Holes: | 2 |
| Number of Drill Holes: | 182 |
| BOARD MATERIAL | — |
| Base Material: | RO3210 0.635mm |
| Final foil external: | 1 oz |
| Final foil internal: | 1 oz |
| Final height of PCB: | 0.8 mm ±0.08 |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold (23.3%) 0.05µm over 3µm nickel |
| Solder Mask Apply To: | TOP and Bottom, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
| CONTOUR/CUTTING | Routing, v-cut |
| MARKING | TOP and Bottom, White legend |
| VIA | Plated through hole(PTH), minimum size 0.3mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 18um(0.5 oz)+plate TOP layer
- RO3210 0.635mm
- copper ------- 18um(0.5 oz)+plate BOT layer
Application areas
- Automotive Collision Avoidance Systems
- Automotive Global Positioning Satellite Antennas
- Base Station Infrastructure
- Datalink on Cable Systems
- Direct Broadcast Satellite
- LMDS and Wireless Broadband
- Microstrip Patch Antennas for Wireless Communications
- Power Backplanes
- Remote Meter Readers
- Wireless Telecommunications Systems
Properties
RO3210 Typical Properties
| Property | RO3210 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 10.20 ± 0.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 10.8 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -459 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10³ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10³ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.12 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.81 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 13 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 13 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 34 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 11.0 (1.9) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 3.0 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
