Rogers DiClad 870 Microwave PCB - 31mil 93mil 125mil Woven Fiberglass Reinforced PTFE-Based Circuit Boards
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- Material
- Rogers DiClad 870 (Woven Fiberglass/PTFE) / 31-125mil
- MOQ
- 1PCS
- Lead time
- 7-13 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
(Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only.)
The Rogers DiClad 870 Microwave PCB is a high-performance circuit board designed for RF and microwave applications. Built on Rogers DiClad 870 laminates, this PCB features woven fiberglass/PTFE composites that provide excellent dimensional stability and low dielectric constant (Dk 2.33 at 10 GHz and 1 MHz). With a low dissipation factor of 0.0013 at 10 GHz, the DiClad 870 PCB ensures minimal signal loss, making it ideal for high-frequency systems. Available in 31mil, 93mil, and 125mil thicknesses, it is suitable for a wide range of applications, including phased arrays, radar systems, and base station antennas.
1. Low Dielectric Constant (Dk): 2.33 at 10 GHz and 1 MHz for superior signal integrity. 2. Low Dissipation Factor (Df): 0.0013 at 10 GHz, ensuring minimal signal loss. 3. Low Moisture Absorption: Among the lowest for PTFE-based composites, enhancing reliability. 4. Stable Dk Over Frequency: Ensures easy design transition and scalability. 5. Low Dk Supports Wider Line Widths: Reduces insertion loss for better performance. 6. Copper-Matched CTE: Matches the coefficient of thermal expansion in the X and Y axes for reduced stress. 7. Excellent Outgassing Values: Meets TML, CVCM, and WVR standards for space applications. 8. UL94-V0 Compliance: Meets flammability standards for safety.
1. Commercial Phased Array Networks2. Digital Radio Antennas3. Filters, Couplers, and LNAs (Low Noise Amplifiers)4. Guidance Systems5. Low Loss Base Station Antennas6. Radar Feed Networks
PCB specifications
PCB Capability (DiClad 870)
Typical properties: DiClad 870
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Properties | Test Conditions | Typical Value | Units | Test Method |
|---|---|---|---|---|
| ELECTRICAL PROPERTIES | ||||
| Dielectric Constant | 23°C @ 50% RH, 10 GHz | 2.33 | - | IPC TM-650 2.5.5.5 |
| Dielectric Constant | 23°C @ 50% RH, 1 MHz | 2.33 | - | IPC TM-650 2.5.5.3 |
| Dissipation Factor | 23°C @ 50% RH, 10 GHz | 0.0013 | - | IPC TM-650 2.5.5.5 |
| Dissipation Factor | 23°C @ 50% RH, 1 MHz | 0.0009 | - | IPC TM-650 2.5.5.3 |
| Thermal Coefficient of Dielectric Constant | -10 to 140°C, 10 GHz | -161 | ppm/°C | IPC TM-650 2.5.5.5 |
| Volume Resistivity | C96/35/90 | 1.5 x 10⁹ | MΩ-cm | IPC TM-650 2.5.17.1 |
| Surface Resistivity | C96/35/90 | 3.4 x 10⁷ | MΩ | IPC TM-650 2.5.17.1 |
| Dielectric Breakdown | D48/50 | >45 | kV | ASTM D-149 |
| Arc Resistance | - | >180 | - | ASTM D-495 |
| THERMAL PROPERTIES | ||||
| Coefficient of Thermal Expansion - x | 50°C to 150°C | 17 | ppm/°C | IPC TM-650 2.4.41 |
| Coefficient of Thermal Expansion - y | 50°C to 150°C | 29 | ppm/°C | IPC TM-650 2.4.41 |
| Coefficient of Thermal Expansion - z | 50°C to 150°C | 217 | ppm/°C | IPC TM-650 2.4.24 |
| Thermal Conductivity | - | 0.26 | W/(m·K) | ASTM E1461 |
| MECHANICAL PROPERTIES | ||||
| Copper Peel Strength | 10s @ 288°C, 35 μm foil | 14 | lbs/in | IPC TM-650 2.4.8 |
| Young's Modulus | 23°C @ 50% RH | 485, 346 | kpsi | ASTM D-638 |
| Tensile Strength (MD, CMD) | 23°C @ 50% RH | 14.9, 11.2 | kpsi | ASTM D-882 |
| Compressive Modulus | 23°C @ 50% RH | 327 | kpsi | ASTM D-695 |
| Flex Modulus | 23°C @ 50% RH | 437 | kpsi | ASTM D-3039 |
| PHYSICAL PROPERTIES | ||||
| Flammability | C48/23/50 & C168/70 | V-0 | - | UL 94 |
| Moisture Absorption | E1/105+D24/23 | 0.02 | % | IPC TM-650 2.6.2.2 |
| Density | C24/23/50, Method A | 2.26 | g/cm³ | ASTM D792 |
| NASA Outgassing - Total Mass Lost | 125°C, ≤10⁻⁶ torr | 0.02 | % | NASA SP-R-0022A |
| NASA Outgassing - Collected Volatiles | 125°C, ≤10⁻⁶ torr | 0.00 | % | NASA SP-R-0022A |
| NASA Outgassing - Water Vapor Recovered | 125°C, ≤10⁻⁶ torr | 0.01 | % | NASA SP-R-0022A |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
