Rogers CLTE-XT High Frequency PCB - 9.4mil 25mil 40mil 59mil Ceramic-Filled Woven Glass Reinforced PTFE Circuit Boards
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
Brief introduction
The Rogers CLTE-XT High Frequency PCB is a high-performance circuit board designed for demanding RF and microwave applications. Built on Rogers CLTE-XT laminates, this PCB features a composite of PTFE, woven fiberglass reinforcement, and micro-dispersed ceramic filler. This combination ensures excellent thermal reliability, dimensional stability, and superior electrical performance. With a low dissipation factor of 0.0010 at 10 GHz and a tight dielectric constant tolerance of ±0.03, the CLTE-XT PCB is ideal for high-frequency systems requiring low loss and high reliability.
Technical features & benefits
- Copper-Matched CTE: Matches the coefficient of thermal expansion (CTE) in the X and Y axes for reduced stress.
- Low Z-Direction CTE: 20 ppm/°C, ensuring reliable plated through holes.
- Low Dissipation Factor: 0.0010 at 10 GHz, minimizing circuit losses while maintaining dimensional stability.
- Tight Dielectric Constant Tolerance: ±0.03, with stable Dk across temperature changes.
- Low Moisture Absorption: 0.02%, enhancing reliability in humid environments.
- High Thermal Conductivity: 0.56 W/m/K, improving heat dissipation.
- NASA Outgassing Compliance: Meets NASA outgassing standards for space applications.
Product images
Application areas
- Advanced Driver Assistance Systems (ADAS)
- CNI (Communication, Navigation, and Identification) Applications
- Defense Microwave/RF Applications
- Microwave Feed Networks
- Phased Array Antennas
- Power Amplifiers
- Patch Antennas
- Radar Manifolds
- Satellite & Space Electronics
Our PCB Capability
PCB Capability (CLTE-XT Laminates)
| PCB material: | Ceramic/PTFE Microwave Composite |
| Designation: | CLTE-XT |
| Dielectric constant: | 2.94 |
| Layer count: | Single-sided, Double-sided, Multi-layer, Hybrid PCB |
| Dielectric thickness: | 5.1mil, 9.4mil, 20mil, 25mil, 30mil, 40mil, 45mil, 59mil, 60mil |
| Copper weight: | 1oz, 2oz |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Red, Yellow etc. |
| Surface finish: | Immersion gold, HASL, Immersion silver, Immersion tin, ENEPIG, Bare copper, OSP, Pure gold plated |
The CLTE-XT laminates are compatible with various surface finishes, including HASL, Sn, Ag, Ni/Au, and OSP, without issues. Individual boards can be routed, punched, or laser-cut based on design requirements, tolerances, and edge quality needs.
Properties
CLTE-XT Typical Properties
| Property | CLTE-XT | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Design) | 2.93 | — | — | C-24/23/50, 10 GHz | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0010 | — | — | 23°C @ 50% RH, 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -8 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 4.25 × 10⁸ | — | MΩ·cm | C-96/35/90 | IPC-TM-650 2.5.17.1 |
| Dielectric Breakdown | 58 | — | kV | D-48/50 | IPC-TM-650 2.5.6 |
| Td (Decomposition Temp.) | 539 | — | °C | 2 hrs @ 105°C, 5% weight loss | IPC-TM-650 2.3.40 |
| CTE (X) | 12.7 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 13.7 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 40.8 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.56 | Z | W/(m·K) | — | ASTM D5470 |
| Copper Peel Strength | 1.7 (9) | — | N/mm (lbs/in) | 10s @ 288°C, 35µm foil | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.02 | — | % | E1/105+D24/23 | IPC-TM-650 2.6.2.1 |
| Density | 2.17 | — | g/cm³ | C-24/23/50 | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
