IsoClad 917 High Frequency PCB - 20mil (0.508mm) Substrate with Immersion Gold and Green Solder Mask
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
The IsoClad 917 High Frequency PCB is a double-sided wrap-around antenna board designed for intelligent helmet applications. Built on a 20mil (0.508mm) substrate, this PCB features 0.5oz copper cladding plated to 1oz, with a board size of 126mm x 95mm. The surface finish on pads and exposed tracks is immersion gold, ensuring excellent solderability for SMD components. A green solder mask protects the entire board, and all boards are manufactured in compliance with IPC Class 2 standards. Each board undergoes 100% electrical testing, and 30 boards are vacuum-packed for secure shipment.
Product images
PCB specifications
IsoClad 917 20mil High Frequency PCB for Intelligent Helmet Antenna
| PCB SIZE | 126mm x 95mm = 1 piece |
| BOARD TYPE | High Frequency PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | N/A |
| Minimum Trace and Space: | 4 mil / 4 mil |
| Minimum / Maximum Holes: | 0.2 mm / 1.2 mm |
| BOARD MATERIAL | — |
| Base Material: | IsoClad 917 0.508mm |
| Final foil external: | 1.0 oz |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold |
| Solder Mask Apply To: | Both sides |
| Solder Mask Color: | Green |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 17um(0.5 oz)+plate top layer
- IsoClad 917 0.508mm
- copper ------- 17um(0.5 oz)+plate bot layer
Properties
IsoClad 917 Typical Properties
| Property | IsoClad 917 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant @ 10 GHz | 2.17, 2.20 | — | — | C23/50 | IPC-TM-650 2.5.5.5 |
| Dissipation Factor @ 10 GHz | 0.0013 | — | — | C23/50 | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -157 | — | ppm/°C | -10 to +140°C | IPC-TM-650 2.5.5.5 |
| Peel Strength | 10 | — | lbs/in | After Thermal Stress | IPC-TM-650 2.4.8 |
| Volume Resistivity | 1.5 × 10¹⁰ | — | MΩ·cm | C96/35/90 | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 1.0 × 10⁹ | — | MΩ | C96/35/90 | IPC-TM-650 2.5.17.1 |
| Dielectric Breakdown | >45 | — | kV | D48/50 | ASTM D149 |
| CTE (X / Y / Z) | 46 / 47 / 236 | X/Y/Z | ppm/°C | 0 to 100°C | IPC-TM-650 2.4.24 |
| Thermal Conductivity | 0.263 | — | W/(m·K) | 100°C | ASTM E1225 |
| Water Absorption | 0.04 | — | % | E1/105+D24/23 | IPC-TM-650 2.6.2.2 |
| Density | 2.23 | — | g/cm³ | 23°C | ASTM D792 |
| Flammability | UL94 V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
