BICHENGPCBBicheng Technologies Limited

Rogers 4003 60mil 1.524mm Circuit Board: RO4003C High-Frequency PCB for WLAN Applications

(Note: Printed Circuit Boards (PCBs) are tailored products; the images and specifications provided are for reference only.)

Brief introduction

Today, we are excited to introduce the high-frequency PCB constructed with RO4003C laminates.

RO4003C hydrocarbon ceramic laminates are engineered to deliver exceptional high-frequency performance while ensuring cost-effective circuit fabrication. When operational frequencies reach 500 MHz and above, the selection of suitable laminates for designers becomes significantly limited. The RO4003C material possesses essential properties that cater to the needs of RF microwave circuit designers, matching networks, and controlled impedance transmission lines. Its low dielectric loss enables the use of RO4003C in various applications where conventional circuit board materials fall short due to higher operating frequencies.

One standout feature of RO4003C is its low temperature coefficient of dielectric constant, making it one of the best choices among circuit board materials. This laminate maintains a stable dielectric constant over a wide frequency range. Additionally, the thermal coefficient of expansion (CTE) of RO4003C offers crucial advantages for PCB designers. Its expansion coefficient closely matches that of copper, resulting in excellent dimensional stability—a vital attribute for constructing mixed dielectric multilayer boards. The low Z-axis CTE of RO4003C ensures reliable quality in plated through-holes, even under severe thermal shock conditions. With a glass transition temperature (Tg) exceeding 280°C, RO4003C's expansion characteristics remain consistent throughout the entire range of PCB processing temperatures.

Product images

Rogers RO4003C PCB Detailed View
RO4003C PCB Logo

PCB specifications

Rogers 60mil 1.524mm RO4003C High Frequency PCB Double Sided RF PCB for WLAN

PCB SIZE84 x 78mm = 1PCS
BOARD TYPERF PCB, Microwave PCB
Number of LayersDouble sided PCB
Surface Mount ComponentsYES
Through Hole ComponentsYES
Minimum Trace and Space:10mil / 12mil
Minimum / Maximum Holes:0.3 / 2.3mm
Number of Drill Holes:155
BOARD MATERIAL—
Glass Epoxy:RO4003C 60mil, Tg 288℃
Final foil external:1.5oz
Final height of PCB:1.6mm ±0.16
PLATING AND COATING—
Surface FinishElectroless nickel over Immersion Gold (ENIG)
VIAPlated Through Hole(PTH)
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally.

Layer stack-up

  • copper ------- 35um(1oz)+PLATE
  • RO4003C 60mil

Application areas

  • Automotive Radar and Sensors
  • Cellular Base Station Antennas
  • Direct Broadcast Satellites
  • Low Noise Block Converters
  • Power Amplifiers
  • RFID Technology

Properties

RO4003C Typical Properties

PropertyRO4003CDir.UnitsConditionTest Method
Dielectric Constant (Process)3.38 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.55Z——Microstrip / Differential Phase Length
Dissipation Factor0.0027Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+40—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.7 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity4.2 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.04—%D48/50ASTM D570
Thermal Conductivity0.71ZW/(m·K)50°CASTM D5470
CTE (X)11Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)14Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)46Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength6.0 (1.05)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94
Lead-Free Process CompatibleYes————

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com