Rogers 20mil RO4003C 5 Layer High Frequency PCB with Immersion Gold
(Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only)
Brief introduction
Hello Everyone,
Today, we're discussing a specialized 5-layer high frequency PCB constructed using Rogers RO4003C.
This 5-layer PCB is fabricated using three cores of RO4003C, with one layer of copper etched away to create 5 layers.
In the stack-up, you can observe that three sheets of 20 mil cores form the fundamental structure. Two layers of dielectric material (prepreg) bond these cores, resulting in a robust 5-layer board. The copper weight for the inner layers is half an ounce, while the outer layers are one ounce. The final thickness of the board measures 2.1mm.
Layer stack-up
The micro-section image below provides a clearer view of the board's structure. Notably, there is no solder mask applied to the surface, and the pads are plated with immersion gold.
The stack-up of multilayer PCBs can be customized in various ways to meet specific requirements for controlled impedance and signal transmission. The RO4003C family offers an array of core thicknesses, including 8mil, 12mil, 16mil, 20mil, 32mil, and 60mil.
The fixed thickness of the core is crucial for maintaining the electrical length of RF lines on the circuit board.
We offer a diverse selection of high frequency materials, including Rogers 4000 series, 3000 series, 5000 series, and 6000 series, as well as Taconic TLX and TLY series, and the Chinese F4B series.
If you are interested in our products, please feel free to reach out.
Thank you for reading!
Our PCB Capability
Factory Process Capability (2024)
| Substrate Types and Brands | Standard FR-4, High Tg FR-4, High Frequency Materials, Polyimide/PET flexible Materials |
| Shengyi, ITEQ, Isola, Taiwan Union, Rogers Corp. Taconic, Panasonic | |
| Board Types | Rigid PCB, Flexible Circuits, Rigid-Flex PCB, Hybrid PCB, HDI PCB |
| Maximum Delivery Size | 1200mm x 572 mm |
| Minimum Finished Board Thickness | L≤2L: 0.15mm; 4L: 0.4mm |
| Maximum Finished Board Thickness | 10.0 mm |
| Blind Buried Holes (Non-crossing) | 0.1mm |
| Maximum Hole Aspect Ratio | 15:01 |
| Minimum Mechanical Drill Hole Diameter | 0.1 mm |
| Through-hole Tolerance | +/- 0.0762 mm |
| Press-fit Hole Tolerance | +/- 0.05mm |
| Non-plated Copper Hole Tolerance | +/- 0.05mm |
| Maximum Number of Layers | 32 |
| Internal and External Layer Maximum Copper Thickness | 12Oz |
| Minimum Drill Hole Tolerance | +/- 2mil |
| Minimum Layer-to-Layer Tolerance | +/- 3mil |
| Minimum Line Width/Spacing | 3mil/3mil |
| Minimum BGA Diameter | 8mil |
| Impedance Tolerance | < 50Ω ±5Ω; ≥50Ω±10% |
| Surface Treatment Processes | Leaded/Lead-free HASL, Immersion Gold, Immersion Silver, Immersion Tin, OSP, ENIG, ENEPIG, Pure gold, Carbon Ink, Peelable Mask, Gold Finger, etc. |
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
