6 Layer High Frequency PCB Built on 3 Cores of 20mil RO4003C and 4mil RO4450F for Radar Altimeter
(Printed circuit boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello Everyone,
Warm greetings!
Today, we are discussing a type of 6-layer high-frequency PCB. This PCB is constructed using three cores of 20mil RO4003C, bonded with RO4450F prepreg, specifically designed for radar altimeter applications. Below is the stack-up configuration.
Technical features & benefits
- Stable Dielectric Constant: RO4003C provides a consistent dielectric constant across a wide frequency range, making it ideal for broadband applications
- Signal Loss Reduction: This design minimizes signal loss in high-frequency applications, supporting the advancements in communication technology.
- Certified Manufacturing: Our factory is UL, ISO14001, and IATF16949 certified.
- Spacious Workshop: We operate from a 16,000 square meter workshop.
- Extensive Experience: With over 18 years in the PCB industry, we deliver high-quality products.
Product images
PCB specifications
| Base Material | RO4003C (0.508mm) x 3 sheets, RO4450F (0.102mm) x 1 sheet |
| Layer Count | 6 Layers |
| Type | 1 PCB per panel with V-cut |
| Format | 129mm x 75mm = 1 type = 1 piece |
| Surface Finish | Immersion gold |
| Copper Weight | Outer layer 35 μm / Inner layer 35 μm |
| Solder Mask / Legend | Green / White |
| Final PCB Height | 1.94mm |
| Standard | IPC 6012 Class 2 |
| Packing | 20 panels per shipment |
| Lead Time | 10 working days |
| Shelf Life | 6 months |
Layer stack-up
The RO4003C family includes six core thickness options, ranging from 8mil (0.203mm) to 60mil (1.524mm):
- RO4003C Thickness:Metric
- 8mil:0.203mm
- 12mil:0.305mm
- 16mil:0.406mm
- 20mil:0.508mm
- 32mil:0.813mm
- 60mil:1.524mm
The stacking of 6 layers can be configured in various ways to meet specific requirements.
Application areas
- Satellite Antenna
- Power Splitter
- Radio Frequency Applications
- Power Divider
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
