BICHENGPCBBicheng Technologies Limited

RO3003G2 High-Frequency PCB with 10mil Substrate for Superior Performance

(Note: Printed Circuit Boards are custom-made products; the picture and parameters shown are just for reference.)

Brief introduction

The RO3003G2 high-frequency PCB features a 2-layer rigid design with a stackup consisting of a 10mil (0.254mm) thick RO3003G2 dielectric material, complemented by a finished copper weight of 35μm on both sides.

The PCB measures 170mm x 90mm, maintaining precise dimensions with a tolerance of +/- 0.15mm. The minimum trace width and spacing are 4 mils (0.1mm), and the overall thickness of the finished board is 0.3mm. The via plating thickness is 20μm, and the surface finish is immersion gold. The top silkscreen is printed in white, while there is no silkscreen on the bottom side. The top solder mask is green, with no solder mask applied to the bottom side.

This PCB includes 25 components and a total of 93 pads, consisting of 62 through-hole pads and 31 surface-mount technology (SMT) pads located on the top side. The bottom side does not have any SMT pads. Additionally, there are 98 vias and 6 nets (connections) on the PCB. Each unit undergoes a comprehensive 100% electrical test to ensure full functionality before shipment.

Product images

Rogers RO3003G2 PCB 2-Layer 10mil

PCB specifications

PCB SIZE170 x 90mm = 1up
BOARD TYPEDouble sided PCB
Number of Layers2 layers
Surface Mount ComponentsYES
Through Hole ComponentsNO
—RO3003G2 0.254mm
—copper ------- 18um(0.5oz) + plate BOT Layer
Minimum Trace and Space:4 mil / 4 mil
Minimum / Maximum Holes:0.3 mm / 1.5 mm
Number of Different Holes:12
Number of Drill Holes:62
Number of Milled Slots:0
Number of Internal Cutouts:0
Impedance Control:no
Number of Gold finger:0
BOARD MATERIAL—
Ceramic-filled PTFERO3003G2
Final foil external:1.0 oz
Final foil internal:N/A
Final height of PCB:0.3 mm ±0.1
PLATING AND COATING—
Surface FinishImmersion gold, 36%
Solder Mask Apply To:Top Side
Solder Mask Color:Green
Solder Mask Type:Photo-Sensitive-Solder Mask
CONTOUR/CUTTINGRouting
MARKING—
Side of Component LegendTop Side
Colour of Component LegendWhite
Manufacturer Name or Logo:N/A
VIAPlated through hole(PTH), minimum size 0.3mm.
FLAMIBILITY RATING94 V0
DIMENSION TOLERANCE—
Outline dimension:0.0059"
Board plating:0.0029"
Drill tolerance:0.002"
TEST100% Electrical Test prior shipment
TYPE OF ARTWORK TO BE SUPPLIEDemail file, Gerber RS-274-X, PCBDOC etc
SERVICE AREAWorldwide, Globally.

Layer stack-up

  • copper ------- 18um(0.5 oz)+plate TOP layer

Application areas

  • Adaptive cruise control
  • Forward collision warning
  • Active brake assist
  • Lane change assist
  • Traffic jam pilot
  • Parking pilot
  • Blind spot detection

Properties

RO3003 Typical Properties

PropertyRO3003Dir.UnitsConditionTest Method
Dielectric Constant (Design)3.00——8–40 GHzDifferential Phase Length
Dissipation Factor0.0010——23°C, 10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-3—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity10⁷—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity10⁷—MΩCondition AIPC-TM-650 2.5.17.1
Td500—°C (TGA)—ASTM D3850
CTE (X)17Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)16Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)25Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Thermal Conductivity0.50—W/(m·K)50°CASTM D5470
Copper Peel Strength12.7—lbs/in1 oz EDC after solder floatIPC-TM-650 2.4.8
Moisture Absorption0.04—%D48/50IPC-TM-650 2.6.2.1
Density2.1—g/cm³23°CASTM D792
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Available RF PCB Materials

  • Rogers Materials: RO4350B, RO4003C, RO4725JXR, RO4730G3, RO4360G2, RO4533, RO4534, RO4535, RO4830, RO4835, RO3003, RO3006, RO3010, RO3035, RO3203, RO3210.
  • RT/Duroid Materials: RT/Duroid 5880, RT/Duroid 5870, RT/Duroid 6002, RT/Duroid 6006, RT/Duroid 6010.2LM, RT/Duroid 6035HTC, RT/Duroid 5880LZ, RT/Duroid 6202.
  • TMM Materials: TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Kappa 438.
  • AD Series: AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000.
  • DiClad Materials: DiClad 880, DiClad 870, DiClad 527.
  • IsoClad Materials: IsoClad 917, IsoClad 933.
  • CLTE Materials: CLTE-XT, CLTE-AT, CLTE-MW.
  • Copper Clad Materials: CuClad 217, CuClad 233, CuClad 250.

Our PCB Services

PCB mass volume production, Single-sided PCB, Double-sided PCB, Multilayer PCB (up to 32 layers), Heavy copper PCB, Hybrid PCB, Impedance-controlled PCB, Via-in-pad PCB, Ball grid array (BGA) PCB, Blind via PCB, Resin-filled via, Copper-filled via, Edge plated boards, Countersink holes, half holes, press-fit holes, Quick turnaround (QTA) delivery, No Minimum Order Quantity (MOQ), Door-to-door shipment service.

Capability: Producing 2500-3000 types each month.

Service Area

Serving regions including North America, Oceania, Southeast Asia, Eastern Europe, Africa, Latin America, Western & Southern Europe, Northern Europe, Central & South Asia, and the Middle East.

Rogers RO3003G2 PCB Detailed View

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com