BICHENGPCBBicheng Technologies Limited

RF-10 High Frequency PCB with Immersion Tin Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RF-10 copper clad laminates are composites of ceramic filled PTFE and woven fiberglass. RF-10 offers the advantage of high dielectric constant and low dissipation factor. The thin woven fiberglass reinforcement provides both low dielectric loss and improved rigidity for better handling and dimensional stability in multilayer circuits.

Engineered as a cost-effective substrate, RF-10 meets the industry's need for size reduction in RF applications. It bonds well with smooth low profile copper, and its low dissipation characteristics combined with smooth copper foil minimize insertion losses at higher frequencies where skin effect is significant.

Dielectric Constant: 10.2 ±0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz Thermal Conductivity: 0.85 W/mk (Unclad) CTE: x=16 ppm/°C, y=20 ppm/°C, z=25 ppm/°C Moisture Absorption: 0.08% Flammability Rating: V-0

Top Layer: 35μm copperCore: 1.524mm (60mil) RF-10Bottom Layer: 35μm copper

Components: 26Total Pads: 75 (43 thru-hole, 32 SMT)Vias: 53Nets: 2

Artwork Format: Gerber RS-274-XQuality Standard: IPC-Class 2Via Types: Through-hole only (no blind vias)Availability: Worldwide shipping

High DK enables RF circuit size reductionExcellent dimensional stabilityTight DK tolerance (10.2 ±0.3)Enhanced thermal managementExcellent copper adhesionLow thermal expansionCost-effective performance

Commercial airline broadband antennasMicrostrip and stripline circuitsMillimeter wave applicationsRadar and guidance systemsPoint-to-point digital radio antennasHigh-frequency communication systems

PCB specifications

Base MaterialRF-10
Board Dimensions64mm x 45.7mm (±0.15mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.4mm
Finished Thickness1.6mm
Copper Weight1oz (35μm) outer layers
Via Plating Thickness20μm
Surface FinishImmersion Tin
Solder MaskNone
SilkscreenNone
Electrical Test100% tested

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com