BICHENGPCBBicheng Technologies Limited

RF-10 2-Layer 0.6mm PCB – 20mil Ceramic-Filled PTFE with Immersion Silver for High-Frequency RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1. Introduction to RF-10 2-Layer 0.6mm PCB

RF-10 copper clad laminates are composites of ceramic-filled PTFE and woven fiberglass, offering the advantage of high dielectric constant and low dissipation factor. The thin woven fiberglass reinforcement provides both low dielectric loss and improved rigidity for ease of handling, while enhancing dimensional stability for multilayer circuits. These laminates are engineered to deliver a cost-effective substrate with industry-acceptable delivery times, addressing the need for size reduction in RF applications. RF-10 bonds effectively with smooth low-profile copper, and its low dissipation factor combined with very smooth copper results in optimal insertion losses at higher frequencies where skin effect losses play a substantial role.

Dielectric Constant: 10.2 ± 0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz High Thermal Conductivity: 0.85 W/m·K (Unclad) CTE: x-axis 16 ppm/°C, y-axis 20 ppm/°C, z-axis 25 ppm/°C Low Moisture Absorption: 0.08% Flammability Rating: UL 94 V-0

High DK enables RF circuit size reduction Excellent dimensional stability Tight DK tolerance (10.2 ± 0.3) Enhanced thermal management through high thermal conductivity Excellent adhesion to smooth copper surfaces Low CTE in X, Y, and Z directions Outstanding price/performance ratio

5. PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35μm (1oz) RF-10 Core - 20mil (0.508mm) Copper_layer_2 - 35μm (1oz)

Components: 19Total Pads: 44Thru Hole Pads: 32Top SMT Pads: 12Bottom SMT Pads: 0Vias: 27Nets: 2

Microstrip patch antennasGPS antennasPassive components (filters, couplers, power dividers)Aircraft collision avoidance systemsSatellite components

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

RF-10 PCB

PCB specifications

Base MaterialRF-10
Layer Count2-layer
Board Dimensions130mm × 60mm (±0.15mm)
Min. Trace/Space5 mil / 7 mil
Min. Hole Size0.3 mm
Blind ViasNo
Finished Board Thickness0.6 mm
Finished Cu Weight1 oz
Via Plating Thickness20 μm
Surface FinishImmersion Silver
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com