BICHENGPCBBicheng Technologies Limited

RF-10 PCB 2-Layer 125mil High Dielectric Constant Laminates for Microstrip Patch Antennas

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RF-10 copper clad laminates are advanced composites made from ceramic-filled PTFE and woven fiberglass. They offer high dielectric constant and low dissipation factor, making them suitable for high-frequency applications. The thin fiberglass reinforcement enhances both rigidity and dimensional stability, which is essential for multilayer circuit manufacturing.

These laminates are designed to be a cost-effective substrate with reliable delivery times. RF-10 addresses the demand for size reduction in RF applications. It adheres well to smooth, low-profile copper, optimizing insertion losses at higher frequencies where skin effect losses become significant.

Dielectric Constant: 10.2 ± 0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz Thermal Conductivity: 0.85 W/mk (unclad) Coefficient of Thermal Expansion (CTE): -X: 16 ppm/°C -Y: 20 ppm/°C -Z: 25 ppm/°C Moisture Absorption: 0.08% Flammability Rating: V-0

High dielectric constant for compact RF circuit design Exceptional dimensional stability Tight dielectric constant tolerance (10.2 ± 0.3) Enhanced thermal management due to high thermal conductivity Strong adhesion to smooth copper surfaces Low expansion in X, Y, and Z directions Competitive price-to-performance ratio

Copper Layer 1: 35 μm (1 oz)RF-10 Core: 125 mil (3.175 mm)Copper Layer 2: 35 μm (1 oz)

Components: 12Total Pads: 20Through Hole Pads: 11Top SMT Pads: 9Bottom SMT Pads: 0Vias: 16Nets: 2

Microstrip Patch AntennasGPS AntennasPassive Components (filters, couplers, power dividers)Aircraft Collision Avoidance SystemsSatellite Components

RF-10 PCB 2-layer 125mil

PCB specifications

Board Dimensions45mm x 70mm (1 piece), ± 0.15mm
Minimum Trace/Space5/5 mils
Minimum Hole Size0.5mm
Blind ViasNone
Finished Board Thickness3.2mm
Finished Copper Weight2 oz (1.4 mils) on outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskBlack
Bottom Solder MaskNone
Electrical Testing100% testing done before shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com