BICHENGPCBBicheng Technologies Limited

2-Layer RF-10 PCB 0.3mm Thin Immersion Gold Finish for High-Frequency RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RF-10 copper clad laminates are composites of ceramic-filled PTFE and woven fiberglass, engineered to deliver superior performance in high-frequency RF applications. These laminates excel in size reduction for RF circuits while maintaining low dielectric loss and excellent dimensional stability. The smooth, low-profile copper bonding ensures minimal insertion losses, especially critical at higher frequencies where skin effect losses dominate. RF-10 is a cost-effective substrate with industry-leading delivery times, making it a preferred choice for demanding RF and microwave designs.

Dielectric Constant: 10.2 ± 0.3 at 10GHz, enabling compact circuit designs. Low Dissipation Factor: 0.0025 at 10GHz for minimal signal loss. Thermal Conductivity: 0.85 W/mk (unclad) for effective heat dissipation. CTE Stability: Low expansion rates (x: 16 ppm/°C, y: 20 ppm/°C, z: 25 ppm/°C). Moisture Resistance: 0.08% absorption for reliable performance in humid environments. Flame Retardant: V-0 rating for enhanced safety.

Size Reduction: High DK allows for smaller RF circuit designs. Dimensional Stability: Tight tolerances and low CTE ensure consistent performance. Thermal Management: High thermal conductivity prevents overheating. Smooth Copper Adhesion: Ensures optimal signal integrity and low insertion loss. Cost-Effective: Superior performance at a competitive price.

Copper layer 1 - 35μm (1oz) RF-10 Core - 10mil (0.254mm) Copper layer 2 - 35μm (1oz)

Components: 7 Total Pads: 29 Thru Hole Pads: 21 Top SMT Pads: 8 Bottom SMT Pads: 0 Vias: 14 Nets: 2

Microstrip Patch Antennas GPS Antennas Passive Components (filters, couplers, power dividers) Aircraft Collision Avoidance Systems Satellite Components

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

PCB specifications

Base MaterialRF-10 (ceramic-filled PTFE)
Layer Count2 (Double Layer)
Board Dimensions45mm × 50mm (±0.15mm)
Min. Trace/Space6/5 mils
Min. Hole Size0.3mm
Via TypeThrough-hole only (No Blind Vias)
Finished Thickness0.3mm
Copper Weight1oz (35μm)
Via Plating Thickness20μm
Surface FinishImmersion Gold
Silkscreen (Top/Bottom)No / No
Solder Mask (Top/Bottom)No / No
Electrical Test100% tested pre-shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com