IT-180 10-Layer High Temperature HDI PCB with Immersion Gold and 100 Ohm Impedance
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(All PCBs are custom-manufactured. Reference images and parameters may vary based on your design requirements.)
This 10-layer printed circuit board is constructed using ITEQ's IT-180 FR-4 Tg170 substrate, specifically designed for PLC control applications. It has a thickness of 2.0 mm, featuring a white silkscreen on a green solder mask and immersion gold coating on the pads. The board is supplied as a single unit and incorporates a high-density interconnection configuration with blind vias from layers L1 to L3 and L7 to L10, as well as buried vias from L3 to L7. A 100 ohm impedance is controlled on the top layer with trace/gap dimensions of 4 mil/5 mil. The boards are fabricated according to IPC 6012 Class 2 standards using the provided Gerber data, with each set of 20 boards vacuum packed for shipment.
Technical features & benefits
- Proactive Engineering Design: Prevents issues during pre-production.
- Certifications: ISO9001, ISO14001, ISO13485, IATF 16949, UL certified.
- Robust PCB Capabilities: Supports R&D, sales, and marketing efforts.
- Any Layer HDI PCBs: Flexible production options available.
- Workshop Size: 16,000㎡ facility with a monthly output of 30,000㎡.
- Diverse PCB Types: Capable of producing 8,000 types of PCBs monthly.
- Customer Satisfaction: Complaint rate of less than 1%.
- Timely Delivery: Quick and reliable shipping.
- No Minimum Order Quantity: Low cost for prototypes and small runs.
- Experience: Over 22 years in high-frequency PCB manufacturing.
Product images
PCB specifications
| Item | Description | Value | |
| Layer count | 10 layer PCB | 10 layer board | |
| Board type | Multilayer pcb | Multilayer pcb board | |
| Board size | 168.38 x 273.34mm=1up | 168.38 x 273.34mm=1up | |
| Laminate | Laminate Type | FR4 IT-180A | |
| Supplier | ITEQ | ||
| Tg | TG ≥170 | ||
| Finished thickness | 2.0+/-10% MM | ||
| Plating Thickness | PTH Cu thickness | >20 um | |
| Inner layer Cu Thickness | 1/1 OZ | ||
| Surface Cu thickness | 35 um | ||
| Solder Mask | Material type | LP-4G G-05 | |
| Supplier | Nan Ya | ||
| Color | Green | ||
| Single / both sides | Both Sides | ||
| S/M thickness | >=10.0 um | ||
| 3M tape test | NO Peel Off | ||
| Legend | Material type | S-380W | |
| Supplier | Tai yo | ||
| Color | White | ||
| Location | Both Sides | ||
| 3M tape test | No peel off | ||
| Circuit | Trace Width (mm) | 0.203+/-20%mm | |
| Spacing (mm) | 0.203+/-20%mm | ||
| Identification | UL mark | 94V-0 | |
| Date code | 1025 | ||
| Mark location | CS | ||
| Surface Treatment | ENIG | Nickel | 100u'' |
| Gold | ≥2u'' | ||
| Reliability Tests | Thermal shock test | 288±5℃, 10sec, 3 cycles | |
| solder ability test | 245±5℃ | ||
| Function | Electrical Test | 233+/-5℃ | |
| Standard | IPC_6012C CLASS 2 | 100% | |
| Appearance | Visual inspection | 100% | |
| warp and twist | <= 0.75% | ||
| Vias | Through holes | L1-L10 | |
| Blind vias & Buried vias | L1-L3, L7-L10, L3-L7 | ||
Application areas
- CCTV Security: Suitable for security camera systems.
- Wireless G Router: Designed for wireless communication devices.
- Programmable Controllers: Ideal for automation applications.
- Automotive: Used in engine room ECU systems.
- Multilayer and HDI PCB: Supports complex circuit designs.
- Backplanes: Suitable for high-performance backplane applications.
- Data Storage: Designed for data storage solutions.
- Server and Networking: Meets the demands of server and networking equipment.
- Telecommunications: Ideal for telecom devices.
Properties
IT-180ATC Typical Properties
| Property | IT-180ATC | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Glass Transition Temp (Tg, DSC) | 175 | — | °C | — | IPC-TM-650 2.4.25 |
| Decomposition Temp (Td, 5% loss) | 345 | — | °C | — | IPC-TM-650 2.4.24.6 |
| CTE (X/Y) | 10–13 | X/Y | ppm/°C | 40–125°C | IPC-TM-650 2.4.24 |
| CTE (Z, α1) | 45 | Z | ppm/°C | — | IPC-TM-650 2.4.24 |
| CTE (Z, α2) | 210 | Z | ppm/°C | — | IPC-TM-650 2.4.24 |
| Z-axis Expansion | 2.7 | — | % | 50–260°C | IPC-TM-650 2.4.24 |
| T260 | >60 | — | min | — | IPC-TM-650 2.4.24.1 |
| T288 | >30 | — | min | — | IPC-TM-650 2.4.24.1 |
| Dielectric Constant (Dk) @ 1 MHz | 4.4 | Z | — | — | IPC-TM-650 2.5.5.9 |
| Dielectric Constant (Dk) @ 1 GHz | 4.4 | Z | — | — | IPC-TM-650 2.5.5.9 |
| Dielectric Constant (Dk) @ 10 GHz | 4.0 | Z | — | — | IPC-TM-650 2.5.5.9 |
| Dissipation Factor (Df) @ 1 MHz | 0.015 | Z | — | — | IPC-TM-650 2.5.5.9 |
| Dissipation Factor (Df) @ 1 GHz | 0.015 | Z | — | — | IPC-TM-650 2.5.5.9 |
| Dissipation Factor (Df) @ 10 GHz | 0.017 | Z | — | — | IPC-TM-650 2.5.5.9 |
| Volume Resistivity | 3.0 × 10¹⁰ | — | MΩ·cm | C-96/35/90 | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 3.0 × 10¹⁰ | — | MΩ | C-96/35/90 | IPC-TM-650 2.5.17.1 |
| Dielectric Breakdown | 60 | — | kV | Thickness <0.5mm | IPC-TM-650 2.5.6 |
| Peel Strength (HTE Cu) | 1.05 (6.0) | — | N/mm (lb/in) | After thermal stress | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.12 | — | % | — | IPC-TM-650 2.6.2.1 |
| Flammability | V-0 | — | — | — | UL 94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
