High-Performance 4-Layer PCB Solutions with F4BTMS1000 Material for Demanding Applications
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
The F4BTMS series represents an advanced iteration of the F4BTM series, featuring significant breakthroughs in material formulation and manufacturing processes. This high-reliability material is enriched with a substantial amount of ceramics and reinforced with ultra-thin, ultra-fine glass fiber cloth, resulting in enhanced performance and a broader range of dielectric constants. It is particularly suitable for aerospace applications and can effectively replace comparable foreign products.
By incorporating a carefully balanced mix of ultra-thin glass fiber cloth and specially distributed nano-ceramics combined with polytetrafluoroethylene resin, the negative impacts of glass fiber on electromagnetic wave propagation are minimized. This innovation reduces dielectric loss, enhances dimensional stability, and decreases anisotropy in the X/Y/Z axes. Additionally, it improves electrical strength, thermal conductivity, and exhibits excellent low thermal expansion characteristics.
PCB specifications
| Base Material | F4BTMS1000 |
| Layer Count | 4 layers |
| Board Dimensions | 145mm x 145mm (± 0.15mm) |
| Minimum Trace/Space | 5/7 mils |
| Minimum Hole Size | 1.2mm |
| Blind Vias | Top to Inner Layer 1; Buried: Inner Layer 2 to Inner Layer 3 |
| Finished Board Thickness | 12.9mm |
| Finished Copper Weight | 1 oz (1.4 mils) for inner and outer layers |
| Via Plating Thickness | 20 µm |
| Surface Finish | HASL (Hot Air Solder Leveling) |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Black |
| Bottom Solder Mask | No |
| Electrical Testing | 100% Electrical Testing conducted prior to shipment |
Layer stack-up
- Copper Layer 1: 35 µm
- F4BTMS1000 Core: 6.35 mm (250 mil)
- Copper Layer 2: 35 µm
- Prepreg RO4450F: 0.102 mm (4 mil)
- Copper Layer 3: 35 µm
- F4BTMS1000 Core: 6.35 mm (250 mil)
- Copper Layer 4: 35 µm
PCB Statistics
- Components: 19
- Total Pads: 77
- Through Hole Pads: 35
- Top SMT Pads: 42
- Bottom SMT Pads: 0
- Vias: 32
- Nets: 2
Application areas
- Aerospace equipment and cabin systems
- Microwave and RF applications
- Military radar systems
- Feed networks
- Phase-sensitive and phased array antennas
- Satellite communications and more
Properties
F4BTMS1000 Typical Properties
| Property | F4BTMS1000 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 10.20 | — | — | 10 GHz | — |
| Dk Tolerance | ±0.20 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.0023 | — | — | 10 GHz | — |
| Dissipation Factor, 20 GHz | — | — | — | 20 GHz | — |
| Thermal Coefficient of Dk | -320 | — | ppm/°C | -55 to 150°C | — |
| Peel Strength (1oz RTF) | >1.2 | — | N/mm | 1 oz RTF copper | — |
| Volume Resistivity | ≥1×10⁸ | — | MΩ·cm | Room temp | — |
| Dielectric Strength (Z) | >23 | — | kV/mm | — | — |
| Dielectric Breakdown (X/Y) | >42 | — | kV | — | — |
| CTE (X, Y) | 16, 18 | X,Y | ppm/°C | -55 to 288°C | — |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | — |
| Moisture Absorption | 0.03 | — | % | 20±2°C, 24 hrs | — |
| Density | 3.20 | — | g/cm³ | Room temp | — |
| Thermal Conductivity (Z) | 0.81 | Z | W/(m·K) | — | — |
| Flammability | V-0 | — | — | — | UL94 |
Quality Assurance
- Type of Artwork Supplied: Gerber RS-274-X
- Accepted Standard: IPC-Class-2
- Availability: Worldwide
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
