Hybrid PCB High Frequency 4 Layer Mixed PCB Built on 12mil RO4003C and FR-4
(PCBs are custom-made products, the picture and parameters shown are just for reference)
Brief introduction
Hello Everyone,
Today, we will discuss a 4-layer high-frequency PCB constructed using 12mil RO4003C combined with FR-4 materials.
This board features a 4-layer structure, which is relatively simple and cost-effective, making it an excellent choice for entering new markets.
Let's see today's first board.
Technical features & benefits
The benefits of the 12mil RO4003C hybrid PCB are highlighted in the following points:
- Stable Dielectric Constant: RO4003C maintains a consistent dielectric constant across a wide frequency range, making it an ideal substrate for broadband applications.
- Reduced Signal Loss: This design minimizes signal loss in high-frequency applications, aligning with the evolving needs of communication technology.
- Cost Efficiency: Utilizing this hybrid approach can reduce costs compared to stacks made entirely of low-loss materials.
Product images
Layer stack-up
In the stack-up, the first and second layers, as well as the fourth and third layers, consist of a 12mil core of RO4003C. This fixed thickness is crucial for maintaining the electrical length of RF lines on the circuit board. The remaining layers utilize FR-4 materials. The copper weight for both the inner and outer layers is set at 1 ounce.
For the second board, the FR-4 is positioned in layers three and four. Depending on actual applications, the thickness of the dielectric material and FR-4 can be adjusted accordingly.
The stack-up consists of layers from 1 to 2 made of the fixed thickness RO4003C core (8mil), which is crucial for maintaining the electrical length of RF lines on the circuit board. The remaining layers utilize FR-4 materials, and all boards feature through holes.
Application areas
The applications for the 12mil RO4003C hybrid PCB are extensive, including:
- Modular oscilloscopes, Antenna combiners, Balanced amplifiers, 4G antennas
Our PCB Capability
We also offer blind via boards, buried via boards, and HDI boards. All PCBs produced by our company undergo rigorous testing, including AOI inspection, open and short circuit testing, solderability testing, and thermal stress testing at 288°C to ensure the highest quality before shipment.
Thank you for reading. Please feel free to contact us for your RF PCB inquiries.
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Common Hybrid Material Combinations
Currently, the following mature mixed pressing materials are popular:
- RO4350B + FR-4
- RO4003C + FR-4
- F4B + FR-4
- RT/duroid 5880 + RO4350B
- RT/duroid 5880 + FR-4
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
