BICHENGPCBBicheng Technologies Limited

Hybrid PCB Board Built on 20mil RO4003C and 0.75mm FR-4 High Frequency Multi-layer PCB with Mixed Materials

(PCBs are custom-made products; the images and parameters shown are for reference only)

Brief introduction

Hello Everyone,

Warm greetings!

Today, we will discuss a 4-layer hybrid PCB constructed using 20mil RO4003C and FR-4 materials.

This board features a 4-layer structure, which is relatively simple and cost-effective, making it an excellent choice for entering new markets.

Technical features & benefits

  • Stable Dielectric Constant: RO4003C maintains a consistent dielectric constant across a wide frequency range, making it an ideal substrate for broadband applications.
  • Reduced Signal Loss: This design minimizes signal loss in high-frequency applications, aligning with the evolving needs of communication technology.
  • Cost Efficiency: Utilizing this hybrid approach can reduce costs compared to stacks made entirely of low-loss materials.

Product images

4 Layer Hybrid RO4003C PCB Top View

Layer stack-up

Stackup of 4 Layer Hybrid RO4003C PCB Design 1

Firstly, this PCB features a 4-layer structure. The first two layers consist of a 20mil RO4003C core, which serves as the primary wiring layer for signal lines. The third and fourth layers utilize FR-4 material, with both cores bonded using 0.2mm prepreg. Each layer is interconnected through plated through holes (PTH), and the copper weight on both the inner and outer layers is 1 ounce. This design effectively keeps the board cost-effective.

Let's take a look at its micro-section chart.

Microsection of 4 Layer Hybrid RO4003C PCB

On the left, you can see the PTH hole. The lower section represents layers one and two, composed of high-frequency material, while the upper part consists of glass fiber material. The finished thickness of the board measures 1.6mm.

The solder mask and silkscreen colors typically used are green and white, with immersion gold as the surface finish on the pads.

Next, we present another variant of the 20mil RO4003C hybrid PCB, made entirely from two cores of 20mil RO4003C.

Stackup of 4 Layer Hybrid RO4003C PCB Design 2

The applications for the 20mil RO4003C hybrid PCB are extensive, including LNA, optical couplers, balanced amplifiers, duplexers, and more.

Our PCB Capability

PCB Type:Hybrid PCB, Mixed PCB
Mixed type:RO4350B + FR4
RO4003C + FR4
F4B + FR4
Duroid/RT5880 + RO4350B
Duroid/RT5880 + FR4
Solder mask:Green, Red, Blue, Black, Yellow
Layer count:4 Layer, 6 Layer, Multilayer
Copper weight:0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
PCB thickness:1.0-5.0mm
PCB size:≤400mm X 500mm
Surface finish:Bare copper, HASL, ENIG, Immersion tin, OSP

Properties

RO4003C Typical Properties

PropertyRO4003CDir.UnitsConditionTest Method
Dielectric Constant (Process)3.38 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.55Z——Microstrip / Differential Phase Length
Dissipation Factor0.0027Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+40—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.7 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity4.2 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.04—%D48/50ASTM D570
Thermal Conductivity0.71ZW/(m·K)50°CASTM D5470
CTE (X)11Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)14Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)46Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength6.0 (1.05)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94
Lead-Free Process CompatibleYes————

We currently offer a range of mature mixed pressing materials, including

  • RO4350B + FR4
  • RO4003C + FR4
  • F4B + FR4
  • RT/Duroid 5880 + FR4
  • RT/Duroid 5880 + RO4350B

Thank you for reading. We welcome your inquiries regarding RF PCBs.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com