8-Layer Hybrid PCB - RO4003C (8mil) and S1000-2M with Blind Vias and Resin Plugged Holes
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
Brief introduction
This 8-layer hybrid PCB combines Rogers RO4003C hydrocarbon ceramic laminates on the outer layers (TOP and BOTTOM) with Shengyi S1000-2M high-performance FR-4 material in the inner layers. The RO4003C material provides superior high-frequency performance with low dielectric loss (Df 0.0027) and stable dielectric constant (DK 3.38), making it ideal for RF and microwave signal transmission. The S1000-2M material offers excellent thermal reliability with TG185 and high electrical strength for digital and power layers.
This hybrid construction leverages the strengths of both materials: Rogers RO4003C for high-frequency signal integrity on outer layers, and Shengyi S1000-2M for cost-effective, high-reliability inner layers. The board features blind vias (L1-L2 and L7-L8) and resin plugged holes (0.2mm, 0.25mm, 0.35mm) for enhanced routing density and reliability.
Technical features & benefits
- Dielectric Constant (DK): 3.38 ± 0.05 at 10GHz
- Dissipation Factor (Df): 0.0027 at 10GHz
- Thermal Coefficient of DK: +40 ppm/°C
- TG: >280°C — Excellent thermal stability
- CTE X/Y: 11/14 ppm/°C — Matched to copper
- CTE Z: 46 ppm/°C — Reliable plated through holes
- Thermal Conductivity: 0.71 W/m/°K
- Moisture Absorption: 0.06%
- UL 94 V-0 Flammability Rating
- TG (DMA): 185°C — Excellent thermal reliability
- Dielectric Constant (1GHz): 4.6
- Dissipation Factor (1GHz): 0.018
- Volume Resistivity: >10⁶ MΩ·cm
- CTE Z-axis: 41 ppm/°C (Before Tg), 208 ppm/°C (After Tg)
- CTE Z-axis (50-260°C): 2.4%
- Td (5% weight loss): 355°C
- T260: >60 min, T288: >30 min, T300: >15 min
- Water Absorption: 0.08%
- Hybrid Construction — RO4003C for high-frequency outer layers + S1000-2M for reliable inner layers
- RO4003C: Low Dk (3.38) & Low Df (0.0027) — Superior high-frequency performance for RF/microwave signals
- S1000-2M: TG185 & High Reliability — Excellent thermal and mechanical properties for digital/power layers
- Blind Vias (L1-L2, L7-L8) — Enhanced routing density for complex designs
- Resin Plugged Holes (0.2/0.25/0.35mm) — Improved via reliability and planarity
- ENIG Surface Finish — Excellent solderability, corrosion resistance, wire bondability
- 6mm Finished Thickness — Standard thickness for robust mechanical stability
- Lead-Free Process Compatible — Suitable for environmentally friendly manufacturing
Product images
PCB specifications
| Base material | Hybrid: TOP/BOTTOM RO4003C (0.203mm/8mil) + Inner S1000-2M (FR-4, TG170) |
| Layer count | 8-layer |
| Board dimensions | 273mm x 185mm = 1 PCS (including panel edge), ±0.15mm |
| Finished board thickness | 1.6mm (Pressed thickness: 1.579mm) |
| Outer copper weight | 1 oz (35 μm) |
| Inner copper weight | 0.5 oz (17 μm) / 1 oz (35 μm) hybrid |
| Via plating thickness | 20 μm |
| Blind vias | L1-L2 and L7-L8 |
| Resin plugged holes | 0.2mm, 0.25mm, 0.35mm |
| Surface finish | ENIG (Electroless Nickel Immersion Gold) |
| Top Solder Mask | Green |
| Bottom Solder Mask | Green |
| Top Silkscreen | White |
| Bottom Silkscreen | White |
| 100% Electrical test | Used prior to shipment |
Layer stack-up
- Layer:TOP;Material:Copper Layer;Thickness (mm):0.035;Core RO4003C;0.203
- Layer:INN 1;Material:Copper Layer;Thickness (mm):0.017;Prepreg;0.198
- Layer:INN 2;Material:Copper Layer;Thickness (mm):0.017;Core S1000-2M;0.198
- Layer:INN 3;Material:Copper Layer;Thickness (mm):0.035;Prepreg;0.173
- Layer:INN 4;Material:Copper Layer;Thickness (mm):0.035;Core S1000-2M;0.198
- Layer:INN 5;Material:Copper Layer;Thickness (mm):0.017;Prepreg;0.198
- Layer:INN 6;Material:Copper Layer;Thickness (mm):0.035;Core RO4003C;0.203
- Layer:BOT;Material:Copper Layer;Thickness (mm):0.035;Pressed Thickness;1.579
Application areas
- RF and Microwave Circuits
- High-Speed Digital Systems
- Telecommunications Infrastructure and Base Stations
- Radar Systems and Phased Array Antennas
- Satellite Communications and Avionics
- High-Performance Computing and Networking Equipment
- Automotive Radar and Advanced Driver Assistance Systems (ADAS)
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Quality Assurance
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
Rogers RO4003C - High Frequency Circuit Material
RO4000 hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at competitive prices.
RO4000 material possesses the properties needed by designers of RF microwave circuits and matching networks and controlled impedance transmission lines. Low dielectric loss allows RO4000 series material to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The temperature coefficient of dielectric constant is among the lowest of any circuit board material, and the dielectric constant is stable over a broad frequency range.
Shengyi S1000-2M - High-Performance FR-4 Material
S1000-2M is a high-performance modified epoxy FR-4 material designed for high layer count applications requiring excellent thermal reliability and electrical performance. It features a TG of 185°C (DMA) and exhibits superior CAF resistance, thermal stability, and lead-free process compatibility.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
