BICHENGPCBBicheng Technologies Limited

Hybrid High Frequency Multilayer PCB 6-Layer PCB Built on 12mil RO4003C and FR-4

(Printed circuit boards are custom-made products; the images and parameters shown are for reference only)

Brief introduction

Hello Everyone,

Warm greetings!

Today, we are introducing a 6-layer RF PCB constructed using 12mil RO4003C and FR-4. This board is specifically designed for satellite antenna applications. Below is the stack-up diagram of the board.

Product images

6 Layer Hybrid RO4003C PCB Top View

PCB specifications

Base Material12mil (0.305mm) RO4003C + Tg170 FR-4
Dielectric Constant3.38 +/- 0.05
Layer Count6 layers
Via TypeThrough holes
Format105mm x 80mm = 1 type = 1 piece
Surface FinishImmersion gold
Copper WeightOuter layer 35μm / Inner layer 18μm
Solder Mask / LegendGreen / White
Final PCB Height1.4 mm
Other FeaturesImpedance controlled PCB
StandardIPC 6012 Class 2
Packing20 panels per shipment
Lead Time10 working days
Shelf Life6 months

Layer stack-up

Stackup of 6 Layer Hybrid RO4003C PCB

In the stack-up, the 12mil core is positioned on the top layer, primarily serving as the signal layer. The fixed thickness of this core is crucial for maintaining the electrical length of RF lines on the circuit board. The remaining layers consist of FR-4 epoxy glass material, which matches the thickness of the RO4003C core.

Our PCB Capability

Factory Process Capability (2024)

Substrate Types and BrandsStandard FR-4, High Tg FR-4, High Frequency Materials, Polyimide/PET flexible Materials
Shengyi, ITEQ, Isola, Taiwan Union, Rogers Corp. Taconic, Panasonic
Board TypesRigid PCB, Flexible Circuits, Rigid-Flex PCB, Hybrid PCB, HDI PCB
CCL ModelHigh Tg FR-4: S1000-2M, TU-872 SLK, TU-768, IT-180A High CTI FR-4: S1600L, ST115
Rogers Corp: RO4350B, RO4003C, RO4725JXR, RO4730G3, RO4360G2, RO4533, RO4534, RO4535, RO4830, RO4835, RO3003, RO3006, RO3010, RO3035, RO3203, RO3210; RT/Duriod 5880; RT/Duriod 5870, RT/Duriod 6002, RT/duroid 6006, RT/Duroid 6010.2LM, RT/duroid 6035HTC; RT/duroid 5880LZ, RT/duroid 6202; TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Kappa 438; AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000, TC350; TC600; DiClad 880, DiClad 870, DiClad 527; IsoClad 917, IsoClad 933; CLTE-XT, CLTE-AT, CLTE-MW; CuClad 217, CuClad 233, CuClad 250.
Taconic: TLF-35; RF-35TC, RF-60A, RF-60TC, RF-35A2,RF-30, RF-35, RF-45, RF-10, TRF-45; TLX-0, TLX-6, TLX-7, TLX-8; TLX-9, TLY-3, TLY-5, TLY-5Z; CER-10; TSM-DS3
Wangling: F4BM217, F4BM220, F4BM233, F4BM245, F4BM255, F4BM265, F4BM275, F4BM294, F4BM300; F4BME217, F4BME220, F4BME233, F4BME245, F4BME255, F4BME265, F4BME275, F4BME294, F4BME300; F4BTM298, F4BTM300, F4BTM320, F4BTM350; F4BTME298, F4BTME300, F4BTME320, F4BTME350; TP300, TP440, TP600, TP615, TP960, TP1020, TP1100, TP1600, TP2000, TP2200, TP2500; TF300, TF440, TF600, TF960, TF1020, TF1600; F4BTMS220, F4BTMS233, F4BTMS255, F4BTMS265, F4BTMS294, F4BTMS300, F4BTMS350, F4BTMS430, F4BTMS450, F4BTMS615, F4BTMS1000; TFA294, TFA300, TFA615, TFA1020; WL-CT300, WL-CT330, WL-CT330Z, WL-CT338, WL-CT350, WL-CT440, WL-CT615. Dielectric constant ranges DK2.2 DK2.65 DK2.85 DK2.94, DK3.0, DK3.2, DK3.38, DK3.5, DK4.0, DK4.4, DK6.15, DK10.2
Maximum Delivery Size1200mm x 572 mm
Minimum Finished Board ThicknessL≤2L: 0.15mm; 4L: 0.4mm
Maximum Finished Board Thickness10.0 mm
Blind Buried Holes (Non-crossing)0.1mm
Maximum Hole Aspect Ratio15:01
Minimum Mechanical Drill Hole Diameter0.1 mm
Through-hole Tolerance+/- 0.0762 mm
Press-fit Hole Tolerance+/- 0.05mm
Non-plated Copper Hole Tolerance+/- 0.05mm
Maximum Number of Layers32
Internal and External Layer Maximum Copper Thickness12Oz
Minimum Drill Hole Tolerance+/- 2mil
Minimum Layer-to-Layer Tolerance+/- 3mil
Minimum Line Width/Spacing3mil/3mil
Minimum BGA Diameter8mil
Impedance Tolerance< 50Ω ±5Ω; ≥50Ω±10%
Surface Treatment ProcessesLeaded/Lead-free HASL, Immersion Gold, Immersion Silver, Immersion Tin, OSP, ENIG, ENEPIG, Pure gold, Carbon Ink, Peelable Mask, Gold Finger, etc.

Properties

RO4003C Typical Properties

PropertyRO4003CDir.UnitsConditionTest Method
Dielectric Constant (Process)3.38 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.55Z——Microstrip / Differential Phase Length
Dissipation Factor0.0027Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+40—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.7 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity4.2 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.04—%D48/50ASTM D570
Thermal Conductivity0.71ZW/(m·K)50°CASTM D5470
CTE (X)11Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)14Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)46Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength6.0 (1.05)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94
Lead-Free Process CompatibleYes————

Mature Mixed Pressing Materials

  • Currently, the following mixed materials are being utilized:
  • RO4350B + FR-4
  • RO4003C + FR-4
  • F4B + FR-4
  • RT/duroid 5880 + RO4350B
  • RT/duroid 5880 + FR-4

Thank you for reading! We welcome your inquiries regarding RF PCBs.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com