BICHENGPCBBicheng Technologies Limited

F4BTMS615 High Frequency PCB 1.6mm DK6.15 F4B Substrate With Immersion Gold

(PCB's are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

This printed circuit board (PCB) is designed as a double-sided board with two layers of copper, featuring a compact size of 171 mm x 58 mm. It supports surface mount components on the top side. The layer stackup consists of a top layer with 35 µm (1 oz) copper, starting with half-ounce plating, and is supported by a durable F4BTMS615 core material with a thickness of 1.524 mm in the middle. The PCB uses immersion gold for the surface finish and has a black solder mask applied to the top side.

The technology specifications include a minimum trace width of 4 mil and a minimum spacing of 6 mil, enabling precise circuit design. The surface finish is immersion gold, which enhances solderability and provides excellent corrosion resistance. Additionally, a black solder mask is applied to the top side of the PCB, offering durability and an appealing aesthetic while protecting the underlying circuitry from environmental factors.

Technical features & benefits

  • Minimal dielectric constant tolerance and excellent batch-to-batch consistency.
  • Extremely low dielectric loss.
  • Stable dielectric constant and low loss within frequencies up to 40 GHz, meeting the requirements of phase-sensitive applications.
  • Excellent temperature coefficient of dielectric constant and dielectric loss, maintaining frequency and phase stability between -55°C and 150°C.
  • Excellent resistance to radiation, retaining stable dielectric and physical properties even after exposure to irradiation.
  • Low outgassing performance, meeting vacuum outgassing requirements for aerospace applications.
  • Minimal thermal expansion coefficients in the X/Y/Z directions, ensuring dimensional stability and reliable hole copper connections.
  • Improved thermal conductivity, suitable for high-power applications.
  • Excellent dimensional stability.

Product images

F4BTMS615 PCB detail

PCB specifications

F4BTMS615 High Frequency PCB 1.6mm DK6.15 F4B Substrate With Immersion Gold

PCB SIZE171 x 58mm = 1PCS
BOARD TYPEDouble sided PCB
Number of Layers2 layers
Surface Mount ComponentsYES
Through Hole ComponentsNO
Minimum Trace and Space:7 mil / 6 mil
Minimum / Maximum Holes:0.5 mm / 1.5 mm
Number of Drill Holes:27
Surface FinishImmersion Gold
Solder Mask Color:Black (Top)
Final foil external:1 oz
Final height of PCB:1.6 mm ±10%
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally

Layer stack-up

  • copper - 35um(0.5 oz+plate) TOP layer
  • F4BTMS615 - 1.524mm
  • copper - 35um(0.5 oz+plate) BOT Layer

Properties

F4BTMS615 Typical Properties

PropertyF4BTMS615Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz6.15——10 GHz—
Dk Tolerance±0.12————
Dissipation Factor, 10 GHz0.0023——10 GHz—
Dissipation Factor, 20 GHz———20 GHz—
Thermal Coefficient of Dk-96—ppm/°C-55 to 150°C—
Peel Strength (1oz RTF)>1.2—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁸—MΩ·cmRoom temp—
Dielectric Strength (Z)>48—kV/mm——
Dielectric Breakdown (X/Y)>55—kV——
CTE (X, Y)10, 12X,Yppm/°C-55 to 288°C—
CTE (Z)40Zppm/°C-55 to 288°C—
Moisture Absorption0.1—%20±2°C, 24 hrs—
Density2.75—g/cm³Room temp—
Thermal Conductivity (Z)0.67ZW/(m·K)——
FlammabilityV-0———UL94

F4BTMS High-Frequency Material

The F4BTMS series is an upgraded version of the F4BTM series, featuring significant advancements in material formulation and manufacturing processes. This material incorporates a large amount of ceramics and utilizes ultra-thin and ultra-fine fiberglass cloth reinforcement, greatly enhancing its performance and resulting in a wider range of dielectric constants. It is a high-reliability material suitable for aerospace applications and can replace similar foreign products.

By incorporating a small amount of ultra-thin fiberglass cloth reinforcement along with a uniform mixture of special nanoceramics and polytetrafluoroethylene resin, the F4BTMS series minimizes dielectric loss and enhances dimensional stability. The material exhibits reduced anisotropy in the X/Y/Z directions, allowing for higher frequency usage, increased electrical strength, and improved thermal conductivity. It also possesses an excellent low coefficient of thermal expansion and stable dielectric temperature characteristics.

The F4BTMS series comes standard with RTF low roughness copper foil, which reduces conductor loss and provides excellent peel strength. It can be paired with copper-based or aluminum-based options.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com