BICHENGPCBBicheng Technologies Limited

F4BTMS High Frequency PCB for Superior Performance

(PCB's are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

The F4BTMS series is an upgraded version of the F4BTM series, featuring significant technological advancements in material formulation and manufacturing processes. This series incorporates a high concentration of ceramics and utilizes ultra-thin, ultra-fine fiberglass cloth reinforcement. These enhancements greatly improve performance, resulting in a wider range of dielectric constants suitable for high-reliability aerospace applications, effectively replacing similar foreign products.

By integrating ultra-thin fiberglass cloth reinforcement with a uniform mixture of special nanoceramics and polytetrafluoroethylene (PTFE) resin, the F4BTMS series minimizes the fiberglass effect during electromagnetic wave propagation. This reduction decreases dielectric loss and enhances dimensional stability. The material exhibits reduced anisotropy in the X/Y/Z directions, allowing for higher frequency usage, increased electrical strength, and improved thermal conductivity. Additionally, it possesses an excellent low coefficient of thermal expansion and stable dielectric temperature characteristics.

The F4BTMS series features RTF low roughness copper foil, which reduces conductor loss and provides excellent peel strength. It can be paired with either copper-based or aluminum-based options. For instance, F4BTMS294 can be combined with buried 50Ω resistor copper foil to create a resistor film substrate.

Technical features & benefits

  • Minimal dielectric constant tolerance with excellent batch-to-batch consistency.
  • Extremely low dielectric loss.
  • Stable dielectric constant and low loss at frequencies up to 40GHz, ideal for phase-sensitive applications.
  • Excellent temperature coefficient of dielectric constant and loss, maintaining stability between -55°C and 150°C.
  • Radiation resistance, retaining stable dielectric and physical properties after exposure to irradiation.
  • Low outgassing performance, compliant with vacuum outgassing requirements for aerospace applications.
  • Minimal thermal expansion coefficients in the X/Y/Z directions, ensuring dimensional stability and reliable hole copper connections.
  • Improved thermal conductivity suitable for high-power applications.
  • Excellent dimensional stability.
  • Low water absorption.

Application areas

Presented on the screen is an F4BTMS high-frequency PCB, utilizing a 3.2mm substrate with HASL coating on the pads. F4BTMS PCBs are extensively employed in various domains, including:

  • Aerospace and aviation equipment, space installations, and cabin setups.
  • Microwave and RF applications.
  • Radar systems, particularly in military applications.
  • Feed networks for signal distribution.
  • Phase-sensitive antennas and phased array antennas.
  • Satellite communications, and much more.

Our PCB Capability

PCB Capability (F4BTMS)

PCB Material:PTFE, Ultra-thin and ultra-fine fiberglass, ceramics
Designation (F4BTMS)F4BTMSDK (10GHz)DF (10 GHz)
F4BTMS2202.2±0.020.0009
F4BTMS2332.33±0.030.0010
F4BTMS2552.55±0.040.0012
F4BTMS2652.65±0.040.0012
F4BTMS2942.94±0.040.0012
F4BTMS3003.0±0.040.0013
F4BTMS3503.5±0.050.0016
F4BTMS4304.3±0.090.0015
F4BTMS4504.5±0.090.0015
F4BTMS6156.15±0.120.0020
F4BTMS100010.2±0.20.0020
Layer count:Single Sided, Double Sided, Multilayer, Hybrid
Copper weight:0.5oz, 1oz, 2oz
Dielectric thickness:0.09mm~6.35mm
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion Ag, Immersion Sn, OSP, ENEPIG

Properties

F4BTMS Series Typical Properties

PropertyF4BTMS220F4BTMS233F4BTMS255F4BTMS265F4BTMS294F4BTMS300F4BTMS350F4BTMS430F4BTMS450F4BTMS615F4BTMS1000Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.202.332.552.652.943.003.504.304.506.1510.20——10 GHz—
Dk Tolerance±0.02±0.03±0.04±0.04±0.04±0.04±0.05±0.09±0.09±0.12±0.20————
Dissipation Factor, 10 GHz0.00090.00100.00120.00120.00120.00130.00160.00190.00190.00230.0023——10 GHz—
Dissipation Factor, 20 GHz0.00100.00110.00130.00140.00140.00150.00190.00240.0024————20 GHz—
Thermal Coefficient of Dk-130-122-92-88-20-20-39-60-58-96-320—ppm/°C-55 to 150°C—
Peel Strength (1oz RTF)>2.4>2.4>1.8>1.8>1.2>1.2>1.2>1.2>1.2>1.2>1.2—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸≥1×10⁸—MΩ·cmRoom temp—
Dielectric Strength (Z)>26>30>32>34>40>40>42>44>45>48>23—kV/mm——
Dielectric Breakdown (X/Y)>35>38>40>42>48>52>55>52>54>55>42—kV——
CTE (X, Y)40, 5035, 4015, 2015, 2010, 1210, 1110, 1213, 1212, 1210, 1216, 18X,Yppm/°C-55 to 288°C—
CTE (Z)290220807222222047454032Zppm/°C-55 to 288°C—
Moisture Absorption0.020.020.0250.0250.020.0250.030.080.080.10.03—%20±2°C, 24 hrs—
Density2.182.222.262.262.252.282.302.512.532.753.20—g/cm³Room temp—
Thermal Conductivity (Z)0.260.280.310.360.580.580.600.630.640.670.81ZW/(m·K)——
FlammabilityV-0V-0V-0V-0V-0V-0V-0V-0V-0V-0V-0———UL94

Final Note on F4BTMS Substrates

The F4BTMS series offers aluminum-based or copper-based materials, where one side of the dielectric layer is covered with copper foil, and the other side is covered with either aluminum or copper materials. This configuration serves to provide shielding or heat dissipation. For example, F4BTMS220-AL represents the F4BTMS220 model with an aluminum-based substrate, while F4BTMS294-CU denotes the F4BTMS294 model with a copper-based substrate.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com

Note: This page carried an inconsistent legacy field on the old site. It has been corrected to match the actual page content and is queued for human review.