BICHENGPCBBicheng Technologies Limited

F4BM265 + FR4 Hybrid 4-Layer PCB with Blind Vias & Impedance Control for Microwave, Radar & Satellite Communication

(Note: Printed Circuit Boards are custom-made. Images and parameters are for reference only.)

Brief introduction

Wangling's F4BM265 is a PTFE woven glass fabric copper-clad laminate, manufactured using fiberglass cloth, polytetrafluoroethylene (PTFE) resin, and PTFE film through scientific formulation and strict process control. Its electrical performance is improved compared to F4B series, offering a wider dielectric constant range, lower dielectric loss, increased insulation resistance, and more stable performance. It serves as a drop-in replacement for similar foreign products.

F4BM uses ED copper foil for applications without PIM requirements, while F4BME uses reverse-treated RTF copper foil offering excellent PIM performance, more precise circuit control, and lower conductor loss. By adjusting the ratio between PTFE and fiberglass, the dielectric constant is precisely calibrated (DK from 2.17 to 3.0), achieving low loss while enhancing dimensional stability. Higher DK values correspond to higher glass fiber content, resulting in better dimensional stability, lower CTE, better temperature drift, and slightly higher dielectric loss.

This 4-layer hybrid board combines a 3mm F4BM265 core with a 0.5mm FR4 TG170°C core and prepreg (7628(H) x 2 + 2113 x 1), finished with 35μm copper on all layers. The board features blind vias, impedance control (50Ω single-end on L3 & L4), and 25μm IPC-3 plated copper. The ENIG surface finish provides excellent solderability and corrosion resistance.

F4BM Series DK Options: 2.17, 2.33, 2.55, 2.65, 2.94, 3.0 (customizable)

Technical features & benefits

  • Dielectric Constant (DK): 2.65 ± 0.05 @ 10 GHz
  • Dissipation Factor (Df): 0.0013 @ 10GHz, 0.0019 @ 20GHz
  • Excellent TCDK: -100 ppm/°C (-55°C ~ 150°C)
  • High Thermal Conductivity: 0.36 W/m·K (Z-direction)
  • Low Moisture Absorption: ≤0.08% (20±2°C, 24h)
  • CTE: X/Y=14~17 ppm/°C, Z=142 ppm/°C (-55°C ~ 288°C)
  • Long-term operating temperature: -55°C ~ +260°C
  • Blind vias for higher routing density
  • Impedance control: 50Ω ±10% single-end on L3 & L4
  • 25μm IPC-3 plated copper for high reliability
  • Radiation resistance & low outgassing (suitable for aerospace)
  • UL 94 V-0 flammability rating
  • Stable DK (2.65±0.05) — Consistent impedance control for high-frequency designs
  • Low Df (0.0013 @ 10GHz) — Minimal signal loss for RF and microwave applications
  • Excellent Temperature Stability — TCDK of -100 ppm/°C ensures stable performance across temperature
  • Blind Via Technology — Enables higher routing density and HDI designs
  • Precise Impedance Control — 50Ω ±10% single-end on L3 & L4
  • IPC-3 Plating — 25μm plated copper for enhanced reliability
  • Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
  • ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
  • DK 2.65 ± 0.05 @ 10GHz:Stable dielectric constant for consistent impedance control
  • Df 0.0013 @ 10GHz:Low loss for high-frequency RF and microwave designs
  • TCDK: -100 ppm/°C:Excellent temperature stability, minimal variation
  • CTE: 14~17/142 ppm/K:Good dimensional stability, reliable plated through holes
  • Blind vias:Enables higher routing density and HDI designs
  • Impedance control 50Ω ±10%:Ensures signal integrity for high-speed designs
  • IPC-3 plated copper (25μm):High reliability for demanding applications
  • Radiation resistance & low outgassing:Ideal for aerospace, space, and defense
  • ENIG finish:Excellent solderability, corrosion resistance, wire bondability

Product images

F4BM265 Material

PCB specifications

Base material (L1-L2)Wangling F4BM265 (PTFE + Fiberglass) 3.0mm core, DK 2.65
Prepreg (between L2-L3)2 sheets 7628(H) + 1 sheet 2113
Base material (L3-L4)FR4 TG170°C, 0.5mm core
Layer count4-layer
Board dimensions245mm x 245mm = 1 PCS
Finished board thickness4.14mm (nominal)
Finished Cu weightAll layers: 35μm (1 oz)
Plated copper thickness25μm (IPC-3)
Blind viasYes
Impedance controlL3 & L4: 50Ω ±10% single-end
Surface finishENIG (Immersion Gold)
Solder maskGreen (both sides)
SilkscreenWhite (both sides)
100% Electrical testUsed prior to shipment
F4BM/F4BME Thickness (Dielectric)0.1mm, 0.127mm, 0.2mm, 0.25mm, 0.5mm, 0.508mm, 0.762mm, 0.8mm, 1.0mm, 1.5mm, 1.524mm, 1.575mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm (± tolerance per thickness)
Standard Panel Sizes460x610mm, 500x600mm, 850x1200mm, 914x1220mm, 1000x1200mm; Custom: 300x250mm, 350x380mm, 500x500mm, 840x840mm, 1000x1500mm
F4BM Copper Foil (ED)0.5oz (18μm), 1oz (35μm), 1.5oz (50μm), 2oz (70μm)
F4BME Copper Foil (RTF)0.5oz (18μm), 1oz (35μm)
DK Options (F4BM Series)2.17, 2.33, 2.55, 2.65, 2.94, 3.0 (customizable)
Aluminum/Copper Base OptionF4BM***-AL / F4BM***-CU with metal base for shielding/heat dissipation

Layer stack-up

F4BM265+FR4 Stackup
F4BM265 Stackup
  • Layer 1 (Top): Copper, 35 μm (1 oz)
  • Dielectric: F4BM265 Core, 3.0 mm (DK 2.65 @ 10GHz)
  • Layer 2 (Inner): Copper, 35 μm (1 oz)
  • Prepreg: 7628(H) x 2 + 2113 x 1 – total 0.5mm
  • Layer 3 (Inner): Copper, 35 μm (1 oz)
  • Dielectric: FR4 TG170°C Core, 0.5 mm
  • Layer 4 (Bottom): Copper, 35 μm (1 oz)

Application areas

  • Microwave, RF, and radar systems
  • Phase shifters and passive components
  • Power dividers, couplers, and combiners
  • Feed networks and phased array antennas
  • Satellite communications and base station antennas
  • Aerospace and defense electronics

Properties

F4BM265 Typical Properties

PropertyF4BM265Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.65——10 GHz—
Dk Tolerance±0.05————
Dissipation Factor, 10 GHz0.0013——10 GHz—
Dissipation Factor, 20 GHz0.0019——20 GHz—
Thermal Coefficient of Dk-100—ppm/°C-55 to 150°C—
Peel Strength (F4BM, 1oz ED)>1.8—N/mm1 oz ED copper—
Peel Strength (F4BME, 1oz RTF)>1.6—N/mm1 oz RTF copper—
Volume Resistivity≥6×10⁶—MΩ·cmRoom temp—
Surface Resistivity≥1×10⁶—MΩRoom temp—
Dielectric Strength (Z)>25—kV/mm5 kV, 500V/s—
Dielectric Breakdown (X/Y)>34—kV5 kV, 500V/s—
CTE (X, Y)14, 17X,Yppm/°C-55 to 288°C—
CTE (Z)142Zppm/°C-55 to 288°C—
Moisture Absorption≤0.08—%20±2°C, 24 hrs—
Density2.25—g/cm³Room temp—
Thermal Conductivity (Z)0.36ZW/(m·K)——
Continuous Operating Temp-55 to +260—°C——
FlammabilityV-0———UL94

Total thickness: 4.14 mm

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2 (Class 3 available on request)
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • ISO 9001:2015 & UL certified facility

Impedance Control

Layer/TypeTrack Width (mil)Track Gap (mil)CoplaneRequired Value (Ω)Tolerance
L3 Single End24.92——50±10%
L4 Single End36.89——50±10%

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com