F4BM220 High Frequency PCB DK 2.2 PTFE PCB with 3.0mm Thick 1oz Copper and HASL Lead Free
(Printed Circuit Boards are custom-made products, the pictures and parameters shown are just for reference)
Brief introduction
Hello everyone,
Today, we discuss the F4BM220 high frequency circuit board, featuring a thickness of 3.0mm.
The F4BM series laminates are crafted through a precise formulation and pressing of fiberglass cloth, polytetrafluoroethylene (PTFE) resin, and PTFE film. This design enhances electrical performance compared to standard F4B materials. Key improvements include a broader range of dielectric constants, reduced dielectric loss, higher insulation resistance, and enhanced stability, making it a viable alternative to similar foreign products.
PCB specifications
| Layer Count | Double-sided |
| Base Material | F4BM220 (DK 2.2) |
| Dimensions | 61 x 62 mm |
| Finished Thickness | 3.0 mm ±10% |
| Finished Copper Weight | 1 oz |
| SMOBC | No |
| Surface Finish | HASL Lead Free |
The F4BM220 PCB is a double-sided board with a substrate of F4BM220, featuring a dielectric constant of 2.2. It measures 61mm in length and 62mm in width, with a finished thickness of 3.0mm and a copper weight of 1.0 oz. This board does not include a solder mask or silkscreen, and it utilizes HASL as the surface finish.
Layer stack-up
The top and bottom layers are finished with 1 oz copper. The F4BM220 dielectric material is sandwiched between the two layers of copper, maintaining a dielectric constant of 2.2 within the 3.0mm thickness.
This is the photo of this board. The basic colour of F4BM220 PCB is brown.
Our PCB Capability
PCB Capability (F4BM)
| PCB Material: | PTFE glass fiber cloth copper clad laminates | ||
| Designation (F4BM) | F4BM | DK (10GHz) | DF (10 GHz) |
| F4BM217 | 2.17±0.04 | 0.0010 | |
| F4BM220 | 2.20±0.04 | 0.0010 | |
| F4BM233 | 2.33±0.04 | 0.0011 | |
| F4BM245 | 2.45±0.05 | 0.0012 | |
| F4BM255 | 2.55±0.05 | 0.0013 | |
| F4BM265 | 2.65±0.05 | 0.0013 | |
| F4BM275 | 2.75±0.05 | 0.0015 | |
| F4BM294 | 2.94±0.06 | 0.0016 | |
| F4BM300 | 3.00±0.06 | 0.0017 | |
| Layer count: | Single Sided, Double Sided, Multilayer, Hybrid | ||
| Copper weight: | 0.5oz, 1oz, 2oz | ||
| Dielectric thickness: | 0.127mm~12.0mm | ||
| PCB size: | ≤400mm X 500mm | ||
| Solder mask: | Green, Black, Blue, Yellow, Red etc. | ||
| Surface finish: | Bare copper, HASL, ENIG, Immersion Ag, Immersion Sn, OSP, ENEPIG | ||
The dielectric constant of F4BM material is wide, ranging 2.17 to 3.0. Board thickness ranges 0.13mm to 12.0mm. We offer services for prototypes, small batches, and mass production.
If you have any questions, please feel free to contact us. Thank you for your attention.
Properties
F4BM220 Typical Properties
| Property | F4BM220 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 2.20 | — | — | 10 GHz | — |
| Dk Tolerance | ±0.04 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.001 | — | — | 10 GHz | — |
| Dissipation Factor, 20 GHz | 0.0014 | — | — | 20 GHz | — |
| Thermal Coefficient of Dk | -142 | — | ppm/°C | -55 to 150°C | — |
| Peel Strength (F4BM, 1oz ED) | >1.8 | — | N/mm | 1 oz ED copper | — |
| Peel Strength (F4BME, 1oz RTF) | >1.6 | — | N/mm | 1 oz RTF copper | — |
| Volume Resistivity | ≥6×10⁶ | — | MΩ·cm | Room temp | — |
| Surface Resistivity | ≥1×10⁶ | — | MΩ | Room temp | — |
| Dielectric Strength (Z) | >23 | — | kV/mm | 5 kV, 500V/s | — |
| Dielectric Breakdown (X/Y) | >30 | — | kV | 5 kV, 500V/s | — |
| CTE (X, Y) | 25, 34 | X,Y | ppm/°C | -55 to 288°C | — |
| CTE (Z) | 240 | Z | ppm/°C | -55 to 288°C | — |
| Moisture Absorption | ≤0.08 | — | % | 20±2°C, 24 hrs | — |
| Density | 2.18 | — | g/cm³ | Room temp | — |
| Thermal Conductivity (Z) | 0.24 | Z | W/(m·K) | — | — |
| Continuous Operating Temp | -55 to +260 | — | °C | — | — |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
