BICHENGPCBBicheng Technologies Limited

F4BM High Frequency PCB Advanced Laminates for Enhanced Performance

(PCB's are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

The F4BM High Frequency PCB series is crafted from a scientifically formulated blend of fiberglass cloth, polytetrafluoroethylene (PTFE) resin, and PTFE film. This design improves electrical performance compared to the F4B series, featuring a wider range of dielectric constants, lower dielectric loss, increased insulation resistance, and enhanced stability, making it a suitable replacement for similar foreign products.

The F4BM and F4BME variants share the same dielectric layer but differ in copper foil combinations: F4BM uses ED copper foil for applications without Passive Intermodulation (PIM) requirements, while F4BME utilizes reverse-treated foil (RTF) copper foil for superior PIM performance, precise line control, and reduced conductor loss.

By adjusting the ratio of PTFE to fiberglass cloth, both variants achieve precise dielectric constant control, ensuring low loss and improved dimensional stability. A higher dielectric constant is linked to a greater fiberglass proportion, enhancing dimensional stability and reducing thermal expansion.

Technical features & benefits

  • Customizable dielectric constant (DK) options: 2.17 to 3.0
  • Low loss characteristics
  • F4BME with RTF copper foil for excellent PIM performance
  • Cost-effective and diverse size options
  • Radiation resistance and low outgassing
  • Commercially available with large-scale production

Application areas

  • The F4BM High Frequency PCB is ideal for microwave, RF, and radar systems, including phase shifters, passive components, power dividers, couplers, combiners, feed networks, phased array antennas, satellite communications, and base station antennas.

Our PCB Capability

PCB Capability (F4BM)

PCB Material:PTFE glass fiber cloth copper clad laminates
Designation (F4BM)F4BMDK (10GHz)DF (10 GHz)
F4BM2172.17±0.040.0010
F4BM2202.20±0.040.0010
F4BM2332.33±0.040.0011
F4BM2452.45±0.050.0012
F4BM2552.55±0.050.0013
F4BM2652.65±0.050.0013
F4BM2752.75±0.050.0015
F4BM2942.94±0.060.0016
F4BM3003.00±0.060.0017
Layer count:Single Sided, Double Sided, Multilayer, Hybrid
Copper weight:0.5oz (17µm), 1oz (35µm), 2oz (70µm)
Dielectric thickness:0.127mm~12.0mm
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion Ag, Immersion Sn, OSP, ENEPIG

Properties

F4BM / F4BME Series Typical Properties

PropertyF4BM217F4BM220F4BM233F4BM245F4BM255F4BM265F4BM275F4BM294F4BM300Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.172.202.332.452.552.652.752.943.00——10 GHz—
Dk Tolerance±0.04±0.04±0.04±0.05±0.05±0.05±0.05±0.06±0.06————
Dissipation Factor, 10 GHz0.0010.0010.00110.00120.00130.00130.00150.00160.0017——10 GHz—
Dissipation Factor, 20 GHz0.00140.00140.00150.00170.00180.00190.00210.00230.0025——20 GHz—
Thermal Coefficient of Dk-150-142-130-120-110-100-92-85-80—ppm/°C-55 to 150°C—
Peel Strength (F4BM, 1oz ED)>1.8>1.8>1.8>1.8>1.8>1.8>1.8>1.8>1.8—N/mm1 oz ED copper—
Peel Strength (F4BME, 1oz RTF)>1.6>1.6>1.6>1.6>1.6>1.6>1.6>1.6>1.6—N/mm1 oz RTF copper—
Volume Resistivity≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶—MΩ·cmRoom temp—
Surface Resistivity≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶—MΩRoom temp—
Dielectric Strength (Z)>23>23>23>25>25>25>28>30>30—kV/mm5 kV, 500V/s—
Dielectric Breakdown (X/Y)>30>30>32>32>34>34>35>36>36—kV5 kV, 500V/s—
CTE (X, Y)25, 3425, 3422, 3020, 2516, 2114, 1714, 1612, 1512, 15X,Yppm/°C-55 to 288°C—
CTE (Z)2402402051871731421129895Zppm/°C-55 to 288°C—
Moisture Absorption≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08—%20±2°C, 24 hrs—
Density2.172.182.202.222.252.252.282.292.29—g/cm³Room temp—
Thermal Conductivity (Z)0.240.240.280.300.330.360.380.410.42ZW/(m·K)——
Continuous Operating Temp-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260—°C——
FlammabilityV-0V-0V-0V-0V-0V-0V-0V-0V-0———UL94

Final Note on F4BM Series Boards

The F4BM series laminates can be produced with either aluminum-based or copper-based materials, where one side features copper foil and the other is covered with aluminum or copper for shielding or heat dissipation.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com