8-Layer Hybrid PCB with RO4350B + FR4 + RO4003C + RO4450F Stackup, Immersion Gold & IPC-3 for Microwave, Radar & Satellite Communication
(Note: Printed Circuit Boards are custom-made. Images and parameters are for reference only.)
Brief introduction
This 8-layer hybrid PCB combines multiple Rogers high-frequency materials with FR-4 to deliver outstanding performance across RF, microwave, and mixed-signal applications. The stackup features 4mil RO4350B on the top layer, a TG170 FR-4 core in the middle, 8mil RO4003C and 4mil RO4450F bondply as the bonding layer, and 4mil RO4350B on the bottom layer. With a pressed thickness of 1.054mm and 0.5oz inner / 1oz outer copper, this board provides excellent impedance control and low signal loss.
The combination of RO4350B and RO4003C cores, bonded with RO4450F prepreg, ensures excellent dimensional stability, high reliability plated through holes, and low z-axis CTE. The board is finished with immersion gold (ENIG) for superior solderability, and manufactured to IPC-3 standards with 25μm plated copper for high-reliability applications in aerospace, defense, and satellite communications.
Technical features & benefits
- 8-layer hybrid stackup: RO4350B + FR4 TG170 + RO4003C + RO4450F + RO4350B
- Top layer: 4mil RO4350B
- Middle core: TG170 FR-4
- Bottom layer: 4mil RO4350B
- Bonding layer: 8mil RO4003C + 4mil RO4450F
- Inner copper weight: 0.5oz; Outer copper weight: 1oz
- Pressed thickness: 1.054mm
- Plated copper thickness: 25μm
- Surface finish: Immersion Gold (ENIG)
- Top solder mask: No mask (no oil) with black legend; Bottom: Blue solder mask with no legend
- Board dimensions: 110mm x 83mm = 1 PCS
- Quality standard: IPC-3
- Excellent High-Frequency Performance — RO4350B and RO4003C cores provide stable DK and low loss across RF/microwave bands
- Cost-Effective Hybrid Construction — FR-4 core reduces material cost while maintaining RF performance
- RO4450F Bondply — Low z-axis CTE and high Tg for reliable plated through holes
- IPC-3 Plating — 25μm plated copper for aerospace and defense reliability
- Sequential Lamination Capable — RO4450F bondply supports multiple lamination cycles
- Lead-Free Process Compatible — Compatible with lead-free solder processing
- Immersion Gold Finish — Excellent solderability, corrosion resistance, and wire bondability
- Prepreg grades based on RO4000 series core materials
- Compatible in multilayer board constructions with RO4003C, RO4350B, RO4835, RO4350G2, and RO4000 LoPro laminates
- Low z-axis coefficient of thermal expansion ranging from 43 to 60 ppm/°C
- CAF resistant
- Sequential lamination capable
- High frequency thermoset prepreg compatible with FR-4 bond temperatures
- Lead free solder processing compatible
- High reliability plated through-hole
- Hybrid 8-layer stackup:Combines Rogers high-frequency cores with FR-4 for cost-effective performance
- RO4350B / RO4003C cores:Stable dielectric constant and low loss for RF/microwave
- RO4450F bondply:Low z-axis CTE, sequential lamination capable
- TG170 FR-4 core:High thermal stability and cost efficiency
- 25μm plated copper (IPC-3):High reliability for aerospace, defense, satellite applications
- Immersion Gold finish:Excellent solderability, corrosion resistance, wire bondability
PCB specifications
| Base material (Top) | RO4350B, 4mil |
| Middle core | TG170 FR-4 |
| Base material (Bottom) | RO4350B, 4mil |
| Bonding layer | 8mil RO4003C + 4mil RO4450F |
| Layer count | 8 layers |
| Board dimensions | 110mm x 83mm = 1 PCS |
| Finished board thickness | 1.054mm (pressed) |
| Finished Cu weight (inner) | 0.5oz |
| Finished Cu weight (outer) | 1oz |
| Plated copper thickness | 25μm (IPC-3 standard) |
| Surface finish | Immersion Gold (ENIG) |
| Solder mask | Top: No mask (no oil) with black legend; Bottom: Blue solder mask with no legend |
| 100% Electrical test | Used prior to shipment |
| Quality standard | IPC-3 |
RO4450F Bondply – Standard Panel Sizes
- Thickness: 0.0040" (0.102 mm) ± 0.0006"
- Panel sizes: 16"X 18" (406 X 457mm), 24"X 18" (610 X 457mm), 24.5"X 18.5" (622 X 470mm), 24"X 36" (610 X 915 mm)
| Standard Thicknesses (RO4450F Bondply) | 0.0040" (0.102 mm) ± 0.0006" |
| Standard Panel Sizes (RO4450F) | 16"X 18" (406 X 457mm), 24"X 18" (610 X 457mm), 24.5"X 18.5" (622 X 470mm), 24"X 36" (610 X 915 mm) |
| Additional Panel Sizes | Custom sizes available upon request |
| Additional Product Configurations | Contact Customer Service or Sales Engineering to inquire about additional available product configurations |
Layer stack-up
RO4000 Series Bondply – RO4450F Introduction
The RO4400 bondply family is comprised of several grades based on the RO4000 series core materials, and are compatible in multi-layer constructions with RO4000 laminates. A high postcure Tg makes RO4400 series bondply an excellent choice for multi-layers requiring sequential laminations as fully cured RO4400 bondplys are capable of handling multiple lamination cycles. In addition, FR-4 compatible bond requirements permit RO4400 bondply and low flow FR-4 bondply to be combined into non-homogeneous multi-layer constructions using a single bond cycle.
RO4450F bondply has demonstrated improvement in lateral flow capability and is becoming the first choice for new designs or as a replacement in designs that have difficult fill requirements. RO4460G2 bondply provides designers with a 6.15 Dk bonding layer that, just as the other RO4400 bonding materials, exhibits excellent Dk control while maintaining a low z-axis expansion for plated through hole reliability.
- Layer 1 (Top): Copper, 1oz
- Dielectric: RO4350B, 4mil
- Layer 2 (Inner): Copper, 0.5oz
- Dielectric: TG170 FR-4
- Layer 3 (Inner): Copper, 0.5oz
- Dielectric: RO4003C, 8mil + RO4450F, 4mil
- Layer 4 (Inner): Copper, 0.5oz
- Dielectric: TG170 FR-4
- Layer 5 (Inner): Copper, 0.5oz
- Dielectric: RO4003C, 8mil + RO4450F, 4mil
- Layer 6 (Inner): Copper, 0.5oz
- Dielectric: TG170 FR-4
- Layer 7 (Inner): Copper, 0.5oz
- Dielectric: RO4350B, 4mil
- Layer 8 (Bottom): Copper, 1oz
Application areas
- Microwave, RF, and radar systems
- Phase shifters and passive components
- Power dividers, couplers, and combiners
- Feed networks and phased array antennas
- Satellite communications and base station antennas
- Aerospace and defense electronics
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Total pressed thickness: 1.054 mm
Quality Assurance
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-3
- Availability: Worldwide
- 100% Electrical test prior to shipment
- ISO 9001:2015 & UL certified facility
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
